MODEL 24 | DIGITAL MIXER/INTERFACE/RECORDER, 24CH MULTI-TRACK RECORDER/ 22CH ANALOG MIXER WITH 24 IN / 22 OUT
MODEL 24
DIGITAL MIXER/INTERFACE/RECORDER, 24CH MULTI-TRACK RECORDER/ 22CH ANALOG MIXER WITH 24 IN / 22 OUT
MODEL 24
DIGITAL MIXER/INTERFACE/RECORDER, 24CH MULTI-TRACK RECORDER/ 22CH ANALOG MIXER WITH 24 IN / 22 OUT
- UM : EA
- Estimated Weight: 27.5
The
TASCAM Model 24 was developed for easy operation, with everything you need
placed right at your fingertips. 100mm faders allow for precise control over
volume. A full set of familiar EQ and Auxiliary knobs remove the need
for menu diving, and all input/output connections are on the surface for
quick and easy access.
The
Model 24 is truly a modern take on a classic design.
Recording section Supported
Media SD
(512MB to 2GB), SDHC (4GB to 32GB), SDXC (64GB to 512GB), Class 10 or
higher required. File
System SD
card: FAT16, SDHC card: FAT32, SDXC card: exFAT Recording
File Format WAV(BWF) Playback
Format WAV(BWF) Sampling
Frequency 44.1k
/ 48k Hz Bit
Depth 16
/ 24 bit Recordable
Channel Max.
24 channels (22ch + 2 stereo mix) Audio
Inputs MIC
IN CH1
to 12, 13/14 to 19/20 Connector XLR
3-31 (1: GND, 2: HOT, 3: COLD) Maximum
Input Level +10dBu Nominal
Input Level –8dBu Minimum
Input Level –58dBu Gain
Adjustable Range 0
to 50dB Input
Impedance 1.8kohm Phantom
Power supply +48V LINE
IN CH1
to 20 Connector 1/4"
(6.3mm) TRS Phone jack (Balanced) Maximum
Input Level +22dBu Nominal
Input Level +4dBu Gain
Adjustable Range –10
to +40dB: CH1 to 12, +20 to +30dB: CH13/14 to 19/20 Input
Impedance 22kohm INSERT CH
1 and 2 Connector 1/4"
(6.3mm) TRS Phone jack (T: Send, R: Return, S: GND) Return
(Ring) Maximum
Input Level +18dBu Nominal
Input Level 0dBu Input
Impedance 10kohm Send
(Tip) Maximum
Output Level +18dBu Nominal
Output Level 0dBu Output
Impedance 100ohm RCA
INPUT Connector RCA
Pin jack (Unbalanced) Maximum
Input Level +8dBV Nominal
Input Level –10dBV Input
Impedance 10kohm STEREO
INPUT Connector 1/8"
(3.5mm) Stereo Mini jack (Unbalanced) Maximum
Input Level +8dBV Nominal
Input Level –10dBV Input
Impedance 10kohm OUTPUTS MAIN
OUTPUT Connector> XLR
3-32 (1: GND, 2: HOT, 3: COLD) Maximum
Output Level +22dBu Nominal
Output Level +4dBu Output
Impedance 100ohm SUB
OUT, MONITOR, FX OUT, CONTROL ROOM OUT Connector> 1/4"
(6.3mm) TRS Phone jack (T: HOT, R: COLD, S: GND) Maximum
Output Level +16dBu Nominal
Output Level -2dBu Output
Impedance 100ohm PHONES
OUT Connector 1/4"
(6.3mm) Stereo Phone jack Output
Level 80mW
+ 80mW (32 ohm loaded) Working
impedance 16
to 600 ohm REMOTE Compatible
with TASCAM RC-1F Foot Switch Connector 1/4"
(6.3mm) TS Phone jack USB Connector USB
B type 4-pin Transfer
Format USB2.0
High-Speed Format Mass-storage
class/USB Audio Class 2.0 (USB class-compliant) USB
Audio Sampling
Rate 44.1k
/ 48k Hz Bit
Depth 16
/ 24 bit INPUT 24ch
*Output from this unit OUTPUT 22ch
*Input to this unit Bluetooth® Output
Class Class
2 (Transmission range: approx. 33ft. / 10 m) Bluetooth®
version 4.0 Supported
Profile A2DP,
AVRCP 1.0 Supported
A2DP Codecs SBC,
AAC A2DP
Content Protection SCMS-T Channel
EQ Low-Cut 100Hz,
–18dB / Octave Hi-Shelving +15dB
/ –15dB, Cut off frequency: 12kHz Mid Peaking Low-Shelving +15dB
/ –15dB, Cut off frequency = 80Hz Graphic
EQ Band 7-Band Frequency 125
/ 250 / 500 / 1k / 2k / 4k / 8k Hz Gain +15dB
/ –15dB FX Type 1:
SMALL HALL / 2: LARGE HALL / 3: SMALL ROOM / 4: LARGE ROOM / 5: PLATE / 6:
STUDIO / 7: LIVE / 8: SHORT DELAY/ 9: DELAY / 10: PING PONG / 11: CHORUS /
12: FLANGER / 13: DELAY + S.HALL / 14: DELAY + L.HALL / 15: CHORUS + S.HALL /
16: CHORUS + L.HALL Power AC
100 to 240V, 50/60Hz Power
Consumption 52
W Dimensions
(W×H×D) 576
× 112.5 mm × 513 (including side panels, knobs and connectors) including
Side panels 22.67"
× 4.43" × 20.20" / 576 × 112.5 mm × 513 (including knobs and
connectors) excluding
Side panels) 20.26"
4.43" × 19.80" × / 540 × 112.5 mm × 503 (including knobs and
connectors) Weight 22.49
lbs. / 10.2 kg Operating
Temperature 41°
to 95°F / 5° to 35°C Included
Items AC
Cord, Owner's manual (incl. Warranty card), TASCAM ID registration guide Available
Accessories TASCAM
RC-1F Footswitch
NOTE:
0dBV = 1Vrms, 0dBu = 0.775Vrms
Audio
Performance
Residual
Output Noise –100dBu
(MAIN OUT, MAIN fader: MIN) Equivalent
Input Noise –128dBu
(Mono Input Channel, Rs: 150ohm, GAIN knob: Max) Total
Harmonic Distortion 0.01%
or less (MIC IN to MAIN OUT, Max input level, 1kHz, GAIN min.) Frequency
Response 20Hz
to 30kHz (+0.5/–1.0dB: Analog) Crosstalk –80dB,
channels/input and output (1kHz, PAN fully counter clockwise/fully clockwise) Maximum
Gain 74dB
(MIC to MAIN OUT)
NOTE:
0dBu = 0.775Vrms
* Transmission range may vary, depending on surroundings.
(MONO): +15dB / –15dB, 100Hz to 8kHz Variable
(STEREO): +15dB / –15dB, Center frequency = 600Hz
MID Band Q Fix, 0.55
540 × 112.5 mm × 503 (excluding side panels. including knobs and connectors)
0.004% or less (MIC IN to MAIN OUT, +4dBu, 1kHz, GAIN min.)
20Hz to 20kHz (+0.5/–1.0dB: Digital)
50dB (MIC to INSERT OUT)
74dB (MIC to SUB OUT)
79dB (MIC to CR OUT)
75dB (MIC to MONITOR OUT)
75dB (MIC to FX OUT)
24dB (USB/SD to MAIN OUT)
(EQ and-EQ flatten, PAN fully counter clockwise/fully clockwise)