POWERZONE CONNECT 504 | 10 INPUT 500W MAX 4-CHANNEL NETWORKABLE MATRIX SMART AMP W/ONBOARD DSP, WI-FI & POWERSHARING
POWERZONE CONNECT 504
10 INPUT 500W MAX 4-CHANNEL NETWORKABLE MATRIX SMART AMP W/ONBOARD DSP, WI-FI & POWERSHARING
POWERZONE CONNECT 504
10 INPUT 500W MAX 4-CHANNEL NETWORKABLE MATRIX SMART AMP W/ONBOARD DSP, WI-FI & POWERSHARING
- UM : EA
- Estimated Weight: 7.0
The PowerZone Connect 1U series is a line of DSP-enabled Class-D amplifiers designed to make system installers’ lives easier, offering unparalleled reliability and efficiency, along with exceptional system configuration. The ultra-compact form factor, makes them an ideal choice for audio/voice installation projects with limited space constraints that demand high-output performance. The 1U family powers both conventional low-impedance (4 O to 16 O) loudspeakers and constant voltage (70V/ 100V) transformer-coupled loudspeakers, and features automatic power-sharing technology for proportional distribution in both Lo-Z and Hi-Z modes.
Our intuitive PowerZone Control web app is built into all our PowerZone™ Connect amplifiers for easy system setup. PowerZone Control facilitates effortless customization of even the most challenging audio/voice systems by delivering many DSP configuration options and tuning features, including multi-zone setup, input mixing, priority and ducking, restriction, input and output EQ, S/PDIF output routing, high-pass filter, speaker presets, delay, Wall-S1 controller configuration, Sine generator, and much more.
Features
Ultra-compact ½-rack form factor
Full-matrix DSP configuration via PowerZone Control web app (built-in)
Hybrid power distribution in both Lo-Z and Hi-Z
Powered by Pascal UMAC Class-D technology
Flexible power sharing across output channels
S/PDIF input/output
Configurable GPIO
ErP and Energy Star compliant / UL listed audio equipment
|
Model |
PowerZone Connect 122 |
PowerZone Connect 252 |
PowerZone Connect 254 |
PowerZone Connect 504 |
|
Channels |
2 x lo-Z / 1 x Hi-Z |
2 x lo-Z / 1 x Hi-Z |
4 x lo-Z / 2 x Hi-Z |
4 x lo-Z / 2 x Hi-Z |
|
Output Power @ 4 O |
2 x 60 W |
2 x 125 W |
4 x 60 W |
4 x 125 W |
|
Output Power @ 8 O |
2 x 60 W |
2 x 125 W |
4 x 60 W |
4 x 125 W |
|
Output Power @ 70V |
1 x 125 W |
1 x 250 W |
2 x 125 W |
2 x 250 W |
|
Output Power @ 100V |
1 x 125 W |
1 x 250 W |
2 x 125 W |
2 x 250 W |
|
Power sharing (up to) across all channels |
1 x 125 W |
1 x 250 W |
1 x 250 W |
2 x 250 W |
|
Power Consumption |
75 W |
75 W |
75 W |
150 W |
|
Dimensions |
44 x 220 x 213 mm (1.7 x 8.7 x 8.4 in) |
44 x 220 x 213 mm (1.7 x 8.7 x 8.4 in) |
(1.7 x 8.7 x 12.6 in) |
44 x 220 x 319 mm(1.7 x 8.7 x 12.6 in) |
|
Weight |
2kg (4.4 lbs) |
2kg (4.4 lbs) |
2.8kg (6.2 lbs) |
2.8kg (6.2 lbs) |
|
Total System Power |
125 W |
250 W |
250 W |
500 W |
|
Output Circuitry |
UMAC Class D - full bandwidth PWM modulator with ultra-low distortion |
|||
|
Outputvage |
70Vp / 140Vpp (unloaded) // Bridged 140Vp / 280 Vpp (unloaded) |
|||
|
Signal To Noise-Ratio |
> 106dB (A-weighted, 20Hz-20kHz, 8O load) |
|||
|
THD+N (typical) |
< 0.05% (20Hz-20kHz, 8O load, 3dB below rated power) |
|||
|
Frequency Response |
20Hz-20kHz (+0/-0.25dB (8O load, 3dB below rated power) |
|||
|
Protection Circuits |
Short circuit -, DC -, Undervoltage -, Temperature - and Overload protection |
|||
|
Power Supply |
UREC™ universal mains switch mode power supply with Power Factor Correction (PFC) and standby converter |
|||
|
Operating temperature |
0-40°C |
|||
|
Operating voltage/ Frequency. |
Universal Mains, 100V-240V, 50Hz-60Hz |
|||
|
Standby Consumption |
< 0.5W |
|||
|
Power Ratings |
Output power measured @ 1% THD at 120VAC 60Hz and 230VAC 50Hz |
|||
Customers Also Bought
Customers Also Viewed
POWERZONE CONNECT 504D
PRO 10 INPUT 1500W MAX 2-CHANNEL DANTE-ENABLED NETWORKABLE MATRIX SMART AMPLIFIER WITH ONBOARD DSP
MAP: $1,299.00 / EA
