VM-3240VA AMQ | VOICE ALARM SYSTEM AMPLIFIER, MULTIFUNCTION AMPLIFIER WITH AUDIO INPUTS AND SPEAKER OUTPUTS

  • MAP: $4,028.30 / EA
  • List Price: $4,985.00 / EA
  • Log in to see if custom discounts apply
  • Case Quantity: 0
  • Usually ships in 3-7 days
VOICE ALARM SYSTEM AMPLIFIER, MULTIFUNCTION AMPLIFIER WITH AUDIO INPUTS AND SPEAKER OUTPUTS
VOICE ALARM SYSTEM AMPLIFIER, MULTIFUNCTION AMPLIFIER WITH AUDIO INPUTS AND SPEAKER OUTPUTS
Click image to enlarge
VOICE ALARM SYSTEM AMPLIFIER, MULTIFUNCTION AMPLIFIER WITH AUDIO INPUTS AND SPEAKER OUTPUTS
VOICE ALARM SYSTEM AMPLIFIER, MULTIFUNCTION AMPLIFIER WITH AUDIO INPUTS AND SPEAKER OUTPUTS

VM-3240VA AMQ
VOICE ALARM SYSTEM AMPLIFIER, MULTIFUNCTION AMPLIFIER WITH AUDIO INPUTS AND SPEAKER OUTPUTS

  • UM : EA

The VM-3240VA Voice Alarm System Amplifier is a multifunction amplifier that comes with audio inputs including a background music input, and a speaker output section which has an internal attenuator and a 6-output selector. It permits not only general-purpose broadcast, but also Emergency broadcast which gives pre-recorded instructions in an emergency situation. Emergency broadcasts can be made from am optional RM-300MF Fireman's Microphone as well as from the amplifier, and can be remotely controlled from external equipment. In addition, the unit features a surveillance function which automatically checks the system for failures.

Power Source

120 V AC, 60 Hz

Power Consumption

690 VA (at rated output), 260 W (According to UL60065), 63 W (at no signal)

Rated Output

240 W, 21 O (according to UL60065); 200 W, 25 O (according to UL2572); 200 W, 25 O (according to CAN/ULC-S576 with separate UPS); 100 W, 50 O (according to CAN/ULC-S576); (All total of Speaker output 1 – 6 and Direct Output)

Frequency Response

50 Hz – 20 kHz, ±3 dB (at 1/3 rated output), 800 Hz – 2.8 kHz (according to UL2572); 400 Hz – 4 kHz (according to CAN/ULC-S576)

Distortion

Under 0.7% (at rated output, 1 kHz)

S/N Ratio

Over 85 dB

Audio Input/Output Characteristic

Sampling frequency 48 kHz, A/D D/A CONVERTER: 24 BIT

Input

Input 1 – 3: –50 dB* (MIC) / –10 dB* (LINE) (changeable), 600O, electronically balanced, combined XLR connector (female) / phone jack, Input 4: –50 dB* (MIC) / –10 dB* (LINE) (changeable), 600O, electronically balanced, removable terminal block (14 pins), BGM 1 – 2: –10 dB*, 10 kO, unbalanced, RCA pin jack, External AMP Input: 70 V line, removable terminal block (14 pins)

Output

Speaker output 1 – 2: Max. (240 W) per output, Speaker output 3 – 6: Max. (100 W) per output, Speaker output 1 – 6: Total within rated output, removable terminal block (14 pins), Allowable minimum load: 245 O (20 W) at 70 V line for speaker line failure detection, Direct output: Direct output from internal or external amplifier, removable terminal block (16 pins), Recording output BGM/Paging: 0 dB*, 10 kO, unbalanced, RCA pin jack, Ground faults detection: 0 O, Wire to wire faults detection: 0 O

RM Link

Input 1 – 2: Connecting the RM-300MF/200M Remote Microphone, RJ45 female connector, Maximum distance: Total 800 m between this unit and remote microphones, Link cable: Category 5 Shielded Twisted-Pair straight cable (CAT5-STP)

Network I/F

10BASE-T/100BASE-TX (selectable by automatic negotiation), RJ45 female connector; Maximum distance: 100 m between this unit and a switching hub; Link cable: Category 5 Shielded Twisted-Pair straight cable (CAT5-STP)

VM Link

Output: Connecting the VM-3240E, RJ45 female connector; Link cable: Category 5 Shielded Twisted-Pair straight cable (CAT5-STP)

General Control

Input 1 – 8: No-Voltage make contact input, open voltage: 24 V DC, short-circuit current: 2 mA or less, removable terminal block (14 pins); Output 1 – 8: Isolated open collector output, withstand voltage: 30 V DC,operating current: 10 mA or less, removable terminal block (14 pins)

Power Input/Output

Power in: Connecting the VX-2000DS only (operating range: 20 – 40 V DC); PS out: 28 V DC / 18 A; M4 screw terminal, distance between barriers: 11 mm

22 V DC Output

22 V DC Special Application, Maximum feeding current 0.3 A (for RM-200M only)

DS Link

Connecting the VX-2000DS, RJ45 female connector; Link cable: Category 5 Shielded Twisted-Pair straight cable (CAT5-STP)

Finish

Panel: Aluminum, hair-line, black; Case: Surface-treated steel plate, black, paint

Operating Temperature

0 to 49°C (32 to 120°F)

Operating Humidity

5% to 95% RH (no condesnsation)

Dimensions

482 (W) × 132.6 (H) × 431.2 (D)mm (18.98” x 5.22” x 16.98”)

Weight

16.5kg (36.38 lbs)

Accessories

AC power cord (2m) × 1, Emergency microphone × 1, Plastic foot × 4, Plastic foot mounting screw × 4, Removable terminal plug (14 pins) × 3, Removable terminal plug (16 pins) × 1, Link cable (3m) × 2, Setting software (CD) × 1

Option

Input transformer: IT-450

UL Certified

UL 2572

 

 

More Info

Item Added to Cart View Cart
Wishlist Updated View Wishlists
This website uses cookies to ensure you get the best user experience. By continuing to use this site, you agree to our cookies and terms of use policy.