LEA CS704 | 4CH AMP X 700W @ 4OHM, 8OHM, 70V, 100V PER CHANNEL - INTERNAL DSP W/CROSSOVERS, IOT DEVICE
LEA CS704
4CH AMP X 700W @ 4OHM, 8OHM, 70V, 100V PER CHANNEL - INTERNAL DSP W/CROSSOVERS, IOT DEVICE
LEA CS704
4CH AMP X 700W @ 4OHM, 8OHM, 70V, 100V PER CHANNEL - INTERNAL DSP W/CROSSOVERS, IOT DEVICE
- UM : EA
- Estimated Weight: 18.0
The CONNECTSERIES 704 is a 4-channel amplifier with 700 watts per channel. As part of the Network CONNECTSERIES, the world’s first Internet of Things- (IoT) enabled professional-grade amplifiers, it is perfectly suited for small to medium-scale installations. The 704 features direct HiZ (70V or 100V) or LoZ selectable by channel. With three ways to connect, you can engage the built-in Wi-Fi access point, connect to the venue’s Wi-Fi, or use the FAST Ethernet to connect to any local area network via Cat5 or Cat6 cable.
Features:
- 3 Ways To Connect: Built-in Wi-Fi Access Point, Existing Wi-Fi Network, Local Area Network
- Web Browser-Based Ui
- Cloud Control
- Direct Low-Z & Hi-Z
- Smart Power Bridge
- Universal Switch-Mode Power Supply
- Analog Balanced Inputs
- 96khz Analog Devices Dsp
- External I/O Port
- Highly Efficient Class-D Output Stage
| Inputs | Analog: 4 Balanced Inputs with user selectable 26 dB and 34 dB input sensitivity |
|---|---|
| Thd+N | 0.1% (20Hz to 20kHz) |
| Frequency Response | 20Hz to 20kHz, +/- 0.5 dB @ 4Ω, 8Ω, 70V, 100V, -2.5dB @ 20kHz at 2Ω |
| Signal To Noise Level | 105dB (20Hz to 20kHz referenced to 8Ω) |
| Crosstalk | 70dB (20Hz to 20kHz) |
| Amplifier Output Classification | Class D with Proprietary Smart Power Bridge Technology allowing bridged output functionality without sacrificing an amplifier channel |
| Dsp Architecture | Analog Devices Sigma 96kHz DSP Processor with 32-bit Core with Sample Rate Converters |
| Input Matrix | Routable matrix any input to any output with primary and secondary input priority |
| Crossovers | Up to 48 dB/Octave IIR Filters (Linkwitz Riley and Butterworth) |
| Parametric Eq | 8 Band Parametric EQ per channel |
| Output Delay | 100ms per channel |
| Output Protection | DC, VHF, and AC Mains Protection, Overtemp and Current Limiter, fan fault detection |
| User Adjustable Limiting | Peak Voltage and RMS Voltage |
| Load Monitoring | Realtime Load Monitoring and Pilot Tone Detection from Internal or External Sources |
| User Interface | Web Browser User Interface, 3rd Party API control, or CLOUD control |
| External I/O | External I/O In: Toggles Remote On/Off External I/O Out: Indicates Amplifier Health |
| Ac Mains | 100VAC - 240VAC +/- 15% 50Hz or 60Hz |
| Power Supply | Universal Switch Mode Power Supply with Power Factor Correction |
| Product Specifications | |
|---|---|
| Brand | LEA Professional |
Customers Also Viewed
CA504
4CH POWER AMPLIFIER 4 X 500W @ 4 OHMS, 4 X 250W @ 8 OHMS, 4 X 500W @ 2 OHMS, 1000W BRIDGED @ 70V
MAP: $2,199.00 / EA
DPA1202
2CH/3CH/4CH 1200W NETWORKABLE POWER AMPLIFIER WITH DSP -70V, 100V, 4OHM & 8OHM OPTIONS
MAP: $2,078.99 / EA
LEA CS704D
4CH AMP 700W PER CH AT 2OHM, 4OHM, 8OHM,25V, 70V, 100V / 40W AT 2OHM / HIZ OR LOWZ SELECTABLE PER CH
MAP: $4,180.00 / EA
