POWERZONE CONNECT 2004 | PRO 10 INPUT 2000W MAX 4-CHANNEL NETWORKABLE MATRIX SMART AMP WITH ONBOARD DSP, WI-FI, AND CONTROL
POWERZONE CONNECT 2004
PRO 10 INPUT 2000W MAX 4-CHANNEL NETWORKABLE MATRIX SMART AMP WITH ONBOARD DSP, WI-FI, AND CONTROL
POWERZONE CONNECT 2004
PRO 10 INPUT 2000W MAX 4-CHANNEL NETWORKABLE MATRIX SMART AMP WITH ONBOARD DSP, WI-FI, AND CONTROL
- UM : EA
- Estimated Weight: 23.0
ThePowerZone Connect 2U series is a line of ultra-reliable, full-matrixDSP-enabled Class-D amplifiers that delivers exceptional system configurationand flexible output, with a total system power ranging from 1000W to 3000W. ThePowerZone Connect 2U series powers both conventional low-impedance (2 O to 16 O)loudspeakers and constant voltage (70V/100V) transformer-coupled loudspeakers,and features automatic power-sharing technology for proportional distributionin both Lo-Z and Hi-Z modes.
Ourintuitive PowerZone Control web app is built into all our PowerZone Connectamplifiers for easy system setup. PowerZone Control facilitates effortlesscustomization of even the most challenging audio/voice systems by deliveringmany DSP configuration options and tuning features, including multi-zone setup,input mixing, priority and ducking, restriction, input and output EQ, S/PDIFoutput routing, high-pass filter, speaker presets, delay, Wall-S1 controllerconfiguration, Sine generator, and much more.
Features
Fullrack form factor
Full-matrixDSP configuration via PowerZone Control web app (built-in)
Hybridpower distribution in both Lo-Z and Hi-Z
Poweredby Pascal UMAC Class-D technology
Flexiblepower sharing across output channels
S/PDIFinput/output
ConfigurableGPIO
ErPand Energy Star compliant / UL listed audio equipment
| Model | PowerZone Connect 1002 | PowerZone Connect 1502 | PowerZone Connect 2004 | PowerZone Connect 3004 |
| Channels | 2 x Lo-Z/1 x Hi-Z | 2 x Lo-Z/1 x Hi-Z | 4 x lo-Z / 2 x Hi-Z | 4 x lo-Z / 2 x Hi-Z |
| Output Power @ 2 O | 2 x 500 W (SE)* | 2 x 750 W (SE) | 4 x 500 W (SE) | 4 x 750 W (SE) |
| Output Power @ 4 O | 2 x 500 W (SE) 1 x 1000 W (BTL)** | 2 x 750 W (SE) 1 x 1500 W (BTL) | 4 x 500 W (SE) 2 x 1000 W (BTL) | 4 x 750 W (SE) 2 x 1500 W (BTL) |
| Output Power @ 8 O | 2 x 250 W (SE) 1 x 1000 W (BTL) | 2 x 400 W (SE) 1 x 1500 W (BTL) | 4 x 250 W (SE) 2 x 1000 W (BTL) | 4 x 400 W (SE) 2 x 1500 W (BTL) |
| Output Power @ 70V | 1 x 1000 W (BTL) | 1 x 1200 W (BTL) | 2 x 1000 W (BTL) | 2 x 1200 W (BTL) |
| Output Power @ 100V | 1 x 1000 W (BTL) | 1 x 1500 W (BTL) | 2 x 1000 W (BTL) | 2 x 1500 W (BTL) |
| Power Consumption | 350 W | 350 W | 700 W | 700 W |
| Dimensions | 88 x 440 x 332 mm (3.5 x 17.3 x 13.1 in) | 88 x 440 x 332 mm (3.5 x 17.3 x 13.1 in) | 88 x 440 x 332 mm (3.5 x 17.3 x 13.1 in) | 88 x 440 x 332 mm (3.5 x 17.3 x 13.1 in) |
| Weight | 5.9 kg | 5.9 kg | 7.4 kg | 7.4 kg |
| Output voltage | 65 Vp / 130 Vpp (SE unloaded) 130 Vp / 260 Vpp (BTL unloaded) | 80 Vp / 160 Vpp (SE unloaded) 160 Vp / 320 Vpp (BTL unloaded) | 65 Vp / 130 Vpp (SE unloaded) 130 Vp / 260 Vpp (BTL unloaded) | 80 Vp / 160 Vpp (SE unloaded) 160 Vp / 320 Vpp (BTL unloaded) |
| Total System Power | 1000 W | 1500 W | 2000 W | 3000 W |
| Output Circuitry | UMAC Class D - full bandwidth PWM modulator with ultra-low distortion | |||
| Signal To Noise-Ratio | > 106dB (A-weighted, 20Hz-20kHz, 8 O load) | |||
| THD+N (typical) | < 0.05% (20Hz-20kHz, 8 O load, 3dB below rated power) | |||
| Frequency Response | 20Hz-20kHz (+0/-0.25dB (8 O load, 3dB below rated power) | |||
| Protection Circuits | Short circuit -, DC -, Undervoltage -, Temperature - and Overload protection | |||
| Power Supply | UREC universal mains switch mode power supply with Power Factor Correction (PFC) and standby converter | |||
| Operating temperature | 0-40°C | |||
| Operating voltage/ Frequency. | Universal Mains, 100V-240V, 50Hz-60Hz | |||
| Standby Consumption | < 0.5W | |||
| Power Ratings | Output power measured @ 1% THD at 120VAC 60Hz and 230VAC 50Hz | |||
*SE –conventional, single ended output mode
**BTL –bridge-tied load output mode
Customers Also Bought
