WTSD-MIX41K | WTSD INDOOR/OUTDOOR ANALOG WALL 4X1 MIC/LINE MIXER W/OPTIONAL DANTE AUDIO NETWORK INTERFACE

  • MAP: $335.99 / EA
  • List Price: $418.99 / EA
  • Log in to see if custom discounts apply
  • Case Quantity: 0
  • Usually ships in 3-7 days
WTSD INDOOR/OUTDOOR ANALOG WALL 4X1  MIC/LINE MIXER W/OPTIONAL DANTE AUDIO NETWORK INTERFACE
WTSD INDOOR/OUTDOOR ANALOG WALL 4X1  MIC/LINE MIXER W/OPTIONAL DANTE AUDIO NETWORK INTERFACE
Click image to enlarge
WTSD INDOOR/OUTDOOR ANALOG WALL 4X1  MIC/LINE MIXER W/OPTIONAL DANTE AUDIO NETWORK INTERFACE
WTSD INDOOR/OUTDOOR ANALOG WALL 4X1  MIC/LINE MIXER W/OPTIONAL DANTE AUDIO NETWORK INTERFACE

WTSD-MIX41K
WTSD INDOOR/OUTDOOR ANALOG WALL 4X1 MIC/LINE MIXER W/OPTIONAL DANTE AUDIO NETWORK INTERFACE

  • UM : EA
  • Estimated Weight: 2.0

Model WTSD-MIX41K is a 4x1 Mic/line Analog Mixer that features four balanced microphone/line inputs and a balanced line output. Selection between mic or line level is done via dip switch on the rear panel. The high gain mic inputs incorporate user enabled phantom power for condenser microphones and a 120Hz low cut filter to eliminate unwanted low frequency interferences. A global mute function can be triggered via local switch. Separate level controls for each input provide control for the audio mix needed. Input peak and signal indicators give visual reference to set the gain structure for maximum performance.  The WTSD-PWBOB comes with each unit and features a balanced audio output with signal, mute, system priority and power LEDs and 12V DC logic output for remote system muting or power sequencing. 

Mic/line inputs are via a Phoenix type connector on the rear of the WTSD. The WTSD-MIX41K can be converted into Dante Digital Network audio when interfaced with the optional AtlasIED TSD-DAC2i converter. The WTSD-MIX41K is designed to be used in conjunction with the AtlasIED WTSD-XLR4 input plate or with other XLR wall plates. The WTSD-XLR4 also can be used with the WTSD-COVER accessory for outdoor environments that require security.  

Features:

  • Indoor/Outdoor Use
  • Power Supply & WTSD-PWBOB interface included
  • XLR Balanced Mic or Line Input with Individual Level Controls
  • Fits Most 2-Gang Boxes
  • Uses Industry Standard Cat5 or Cat6 Cable
  • High Gain Balanced Line Output for Applications of 400ft.
  • 120Hz/12dB Low Cut Filter for Mic/Line
  • Linkable with other WTSD Mixers on the same BUSS
  • Local Mute Switch
  • Remote Trigger Output for Remote Amplifier Turn On
  • System Priority Mute Function
  • Energy Saving Auto Sleep Mode
  • WTSD-COVER Water Resistant Stainless Steel Locking Cover (Optional)
  • TSD-DAC2i Analog to Dante Digital Audio Transmitter (Optional)
  • WTSD-PWHUB Receiver with Limiter and Isolated Relays & Emergency Mute (Optional)
Input Type Unbalanced, Qty. 4
Impedance 1.2kΩ Balanced, 600Ω Unbalanced
Phantom Power 24VDC Defeatable Rear panel DP SW, ON Indicator RED Front Panel
Low Cut Filter 125Hz/12dB Defeatable Rear Panel DP SW
Line Input Level 500mV (-6dBV) Balanced
Maximum Input Level 6V (+6dBV)
Mic Input Level No Pad Applied = 5mV (-46dB) = 2V (+6dBV) Balanced Output
Mic Input Level 10dB Pad Applied = 15mV (-36dB) = 2V (+6dBV) Balanced Output
Mic Input Level Maximum Input 40mV (-27dBV)
Output Type WTSD Bus
Connector Type RJ45
Frequency Response 20Hz -20KHz +/- 1dB
THD .06% & 1KHz
Height 4.37" (111mm)
Width 4.34" (110mm)
Depth 2.5" (62.6mm)
Weight 0.53 lbs (.24kg)
Shipping Weight 1.3 lbs. (.61kg)
Warranty Period 36 months from date of purchase

Customers Also Bought

2 CHANNEL BALANCED LINE INPUT ANALOG PRE-AMP TO DANTE INTERFACE (CONVERTS ANALOG AUDIO TO DANTE)

TSD-DAC2I

2 CHANNEL BALANCED LINE INPUT ANALOG PRE-AMP TO DANTE INTERFACE (CONVERTS ANALOG AUDIO TO DANTE)

MAP: $404.99 / EA

Qty:
WTSD SS COVER WITH WATER SEAL GASKET

WTSD-COVER

WTSD SS COVER WITH WATER SEAL GASKET

MAP: $120.99 / EA

Qty:
WTSD AUDIO/POWER & CONTROL INTERFACE - 24VDC POWER SUPPLY REQUIRED AND IS NOT INCLUDED

WTSD-PWHUB

WTSD AUDIO/POWER & CONTROL INTERFACE - 24VDC POWER SUPPLY REQUIRED AND IS NOT INCLUDED

MAP: $123.99 / EA

Qty:
WTSD FOUR XLR INPUT WALL PLATE FOR USE WITH WTSD-MIX41K

WTSD-XLR4

WTSD FOUR XLR INPUT WALL PLATE FOR USE WITH WTSD-MIX41K

MAP: $112.99 / EA

Qty:
Item Added to Cart View Cart
Wishlist Updated View Wishlists
This website uses cookies to ensure you get the best user experience. By continuing to use this site, you agree to our cookies and terms of use policy.