A-812D | 8-INPUT DIGITAL MIXER AMP, 120W, INPUTS: 4 X MIC/ 2 X AUX/ 2 X 900 MODULE SLOTS, ONBOARD DSP

Power Source

120 V AC, 60 Hz

Rated Output

120W

Power Consumption

170 W (rated output), 46 W (based on UL62368), 200 mA or less (when power switch is OFF)

Frequency Response

50 Hz to 20 kHz ±3 dB (1/8 rated output)

Total Harmonic Distortion

1 % or less at 1 kHz, rated power (20 kHz LPF (AUX-0025))

Tone Control

Bass: ±10 dB at 100 Hz, Treble: ±10 dB at 10 kHz

Signal to Noise Ration

88 dB or more (Master volume: min) 76 dB or more (Master volume: max) 55 dB or more (INPUT 1 to 6) (A-weighted)

Input

1-2:

-60 dB* (MIC)/-20 dB* (LINE) selectable, 600 O, electronically-balanced, removable terminal block (3.81 mm, 3 pins) Note: MIC inputs are equipped with phantom power (24 V DC, ON/OFF switchable).

3-4:

-60 dB*, 600 O, electronically-balanced, removable terminal block (3.81 mm, 3 pins) Note: Equipped with phantom power (24 V DC, ON/OFF switchable).

5-6:

MIC/LINE selectable MIC: -60 dB* , 600 O, electronically-balanced, removable terminal block (3.81 mm, 3 pins) LINE: -20 dB*, 10 kO, unbalanced, RCA pin jack x 2

Module 1-2

-20 dB*, 10 kO

Output

Speaker

High impedance: 70 V line/42 O/Low impedance 4 to 16 O. Removable terminal block (5.00 mm, 3 pins) selectable

REC:

0 dB *, 600 O, unbalanced, RCA pin jack x 2

PRE AMP:

0 dB *, 600 O, unbalanced, RCA pin jack

Control Input

4 channels, no-voltage make contact input, open voltage: 35 V DC or less, Short-circuit current: 10 mA or less, removable terminal block (3.81 mm, 4 pins)

REMOTE VOLUME: No-voltage make contact input, open voltage: 35 V DC or less, Short circuit current: 10 mA or less, removable terminal block (3.81 mm, 4 pins)

Control Output

POWER REMOTE: Open collector output, withstand voltage: 30 V DC or less, control current:          25 mA or less, removable terminal block (3.50 mm, 4 pins)

EMERGENCY OUT: Open collector output, withstand voltage: 30 V DC or less, control current: 25 mA or less, removable terminal block (3.50 mm, 4 pins)

Indicators

LED level meter, Power indicator, Network connection confirmation indicator, Priority broadcast indicator, Emergency broadcast indicator, Thermal protection indicator, Over-current protection indicator, CPU running indicator, Error indi-cator

Operating Temperature

-10 to +40 °C (14 to 104 °F)

Operating Humidity

85 % RH or less (no condensation)

Finish

Panel: ABS resign, black, Case:  Surface-treated steel plate, black, paint

Dimensions

420 (w) x 96.1 (h) x 313.1 (d) mm or 16,54" x 3.78" x 12.33"

Weight

5.2 kg or 11.46 lb

Options

Input transformer: IT-450, Perforated panel: PF-013B