CONTROL 89MS | 8" MUSHROOM ABOVE-GROUND LANDSCAPE SUBWOOFER, IP65 RATED, 70V/100V/8OHM, GREEN

JBL Control 89MS Above-Ground Landscape Subwoofer

The JBL Control 89MS is a weather-resistant outdoor subwoofer designed for integration with the JBL Control 80 Series landscape speakers and compatible outdoor audio systems. It features a down-firing, long-throw 200 mm (8-inch) driver capable of producing peak sound pressure levels of 115 dB with frequency response extending down to 40 Hz.

The subwoofer includes a built-in low-pass crossover with a dual-slope filter, starting with a gentle slope at the crossover frequency and transitioning to a steeper slope at higher frequencies, enabling smooth frequency blending with full-range or dedicated subwoofer amplifier outputs. It incorporates a multi-tap transformer with selectable taps and an 8-ohm bypass, allowing operation in 70V and 100V distributed systems or in low-impedance direct drive configurations.

The enclosure is constructed from polyethylene with a fully sealed center wiring chamber, rated IP56 for protection against dust and water ingress. External components, including hardware and the baffle, are made from powder-coated stainless steel to resist corrosion. The enclosure’s coloration is uniform throughout the material to maintain appearance despite surface damage.

• 200 mm (8-inch) long-throw driver with polypropylene cone and TPV surround
• Large-diameter 50 mm (2-inch) voice coil on glass fiber former
• 150W pink noise power handling (300W program) at 8 ohm
• Built-in 80W subwoofer-band 70V/100V multi-tap transformer
• IP56-rated weather resistance
• Tough polyethylene enclosure
• Fully-sealed center wiring chamber
• Frequency range: 40 Hz–150 Hz

Frequency Range	40 Hz – 150 Hz
Frequency Response	53 Hz – 110 Hz
Power Rating	300 W Continuous Program (2 hrs), 150 W (600 W Peak) Continuous Pink Noise (2 hrs), 100 W (400 W Peak) Continuous Pink Noise (100 hrs)
Sensitivity	87 dB (average 60 Hz – 105 Hz)
Maximum SPL	115 dB peak (109 dB continuous, 2 hrs) at 1m
Coverage Pattern	Omnidirectional
Directivity Index (DI)	3.0
Nominal Impedance	8 ohm
Transformer Taps	70V: 80 W, 40 W, 20 W, 10 W; 100V: 80 W, 40 W, 20 W
Drivers	200 mm (8-inch) polypropylene cone driver, long-excursion corrosion-resistant thermoplastic vulcanizate surround, 50 mm (2-inch) voice coil on 80% glass fiber + polyamide coil former
Terminals	Bare wire with dielectric-gel-filled wire nuts
Enclosure Material	LDPE Polyethylene plastic, 6 mm minimum wall thickness, UL94V-HB rated, color throughout
Color	Hunter Green RAL 6018
Included Accessories	2 wire nuts, 2 gland nuts, 1 security screwdriver