DPA2402 | 2/4CH NETWORKABLE 2400W POWER AMPLIFIER / 2 X 1200W @ 70V/100V / 4 X 500W @ 4O / 4 X 300W @ 8O / 2RU
DPA2402
2/4CH NETWORKABLE 2400W POWER AMPLIFIER / 2 X 1200W @ 70V/100V / 4 X 500W @ 4O / 4 X 300W @ 8O / 2RU
DPA2402
2/4CH NETWORKABLE 2400W POWER AMPLIFIER / 2 X 1200W @ 70V/100V / 4 X 500W @ 4O / 4 X 300W @ 8O / 2RU
- UM : EA
- Estimated Weight: 27.9
The AtlasIED DPA2402 features a combination of flexibility, performance and control to provide high value features for applications that require more than just great sound. The network based DPA2402 is a DSP controlled 4-channel amplifier that can be configured in three different amplification arrangements to meet the design requirements of any installation.
FEATURES
- Configurable for Use as 2-Channel 70.7V Amplifier
- Configurable for Use as 4-Channel 4O Amplifier
- Configurable for Use as Single Channel 70.7V and 2-Channel 4O Amplifier
- Networkable with On Board GUI
- Configurable DSP Via GUI
- Site Manager Software with Network Auto-Discovery Fault Reporting, Input & Output Status, Standby Status and Remote Activation via a Scheduler Timer
- User Page with Assignable Input & Output Level Control
- Mute Assignments Triggered Via Audio Signal or Contact Closure
- Audio Sense Turn-On/Off
- Four Balanced Inputs
- Optional Accessory Card Slot for 4-Channel Dante™ Receiver Card or (2) Mic / Line, (2) Aux Input Card
- PC, iOS, & Android Compatible
SPECIFICATIONS
|
POWER OUTPUT |
2 x 1200-Watts @ 70.7V |
|
POWER OUTPUT |
2 x 1200-Watts @ 100V |
|
POWER OUTPUT |
4 x 500-Watts @ 4O |
|
POWER OUTPUT |
4 x 300-Watts @ 8O |
|
POWER OUTPUT |
1 x 1200-Watts @ 70.7V, 2 x 600-Watts @ 4O |
|
POWER OUTPUT |
1 x 1200-Watts @ 100V, 2 x 600-Watts @ 4O |
|
AMPLIFIER TOPOLOGY |
Class AB Switching Hybrid -BASH |
|
INPUT SENSITIVITY |
750mV Balanced, 0dBU |
|
INPUT IMPEDANCE |
Balanced 40kO |
|
MAXIMUM INPUT SIGNAL |
+14dBU Inputs 1-4, +7dBU Inputs 5-8 with Dante™ |
|
THD |
1% @ Rated Output |
|
FREQUENCY RESPONSE |
-3dB 20Hz - 20kHz (DSP Filters Set to Flat) |
|
CROSSTALK |
73dB @ 1kHz |
|
VOLTAGE |
110V - 120V & 220V - 240V Auto Switch Over, 50/60Hz |
|
IDLE CURRENT |
26W |
|
RACK UNITS |
2 |
|
HEIGHT |
3.47" (89mm) |
|
WIDTH |
19" (483mm) |
|
DEPTH |
14.5" (368mm) |
|
SIGNAL TO NOISE RATIO |
-100dB Below Rated output (A-Weighted) |
|
WEIGHT |
21.00 lbs. (9.53kg) |
|
VOLTAGE COMPATIBILITY |
Universal |
Customers Also Bought
Customers Also Viewed
DPA1202
2CH/3CH/4CH 1200W NETWORKABLE POWER AMPLIFIER WITH DSP -70V, 100V, 4O & 8O OPTIONS
MAP: $1,662.99 / EA
FX500.4
4CH NETWORK POWER AMP W/DSP, 4 INPUTS, 4X500W @ 2/4 OHMS, 4X400W @ 8OHMS, 2X1000W @ 70V/100V, 2RU
Call for Price
HPA2604
4CH 2600W COMMERCIAL AMPLIFIER / 4 X 650W @ 70V/100V AND 4/8 OHM - 4-BALANCED INPUTS / 2RU
MAP: $2,092.99 / EA
