DPA404 | 4CH 400W NETWORK AMP, INTEGRATED DSP, 4X100W@70/100V, 4X75W @8OHM / SELECT 70V OR 8OHM PER CH / 1RU
DPA404
4CH 400W NETWORK AMP, INTEGRATED DSP, 4X100W@70/100V, 4X75W @8OHM / SELECT 70V OR 8OHM PER CH / 1RU
DPA404
4CH 400W NETWORK AMP, INTEGRATED DSP, 4X100W@70/100V, 4X75W @8OHM / SELECT 70V OR 8OHM PER CH / 1RU
- UM : EA
- Estimated Weight: 22.0
The DPA404 can be used right out of the box in its factory default configuration as a traditional four-channel 70.7V commercial power amplifier requiring no programming, special set-up, or network connectivity. However, the DPA404 can be configured in four-channel mode with either 4O or 8O load impedances for two stereo zones. Many system designs require both low and high impedance amplification. The DPA404 can be configured for a 70.7V/100V paging/background system on two channels and the other two channels can be used for 4O/8O foreground stereo applications. The DPA404 comes standard with four balanced line inputs and an accessory slot for an optional DPA-DAC4 four-channel Dante™ receiver card or a DPA-AMIX (2) mic/line and (2) AUX input card, for a total of eight inputs. All inputs can be mixed and routed to any of the four amplifier channels.
FEATURES
- - 70.7V, 100V, 8O, or 4O Functionality
- - Configurable DSP via GUI
- - PC Based DPA Site Manager Software with LAN IP Auto-Discovery, Fault Reporting, Input & Output Status, Standby Status and Amplifier Remote Activation via a Scheduler Timer
- - Mute Assignments Triggered via Audio Signal or Contact Closure
- - Four (4) Balanced Inputs, Expandable to Eight (8) via Accessory Card
- - Optional Accessory Card Slot for a DPA-DAC4 Four-Channel Dante™ Receiver or a DPA-AMIX (2) Mic / Line, (2) AUX Input Card
- - Four (4) GPIO Control Ports Assignable in GUI for Mute or Remote Level
- - PC, iOS®, & Android® Controllable
SPECIFICATIONS
POWER OUTPUT | 4 x 100-Watts @ 70.7V |
POWER OUTPUT | 4 x 100-Watts @ 100V |
POWER OUTPUT | 4 x 75-Watts @ 8O |
POWER OUTPUT | 4 x 50-Watts @ 4O |
POWER OUTPUT | 2 x 100-Watts @ 70.7V, 2 x 75-Watts @ 8O |
POWER OUTPUT | 2 x 100-Watts @ 100V, 2 x 50-Watts @ 4O |
AMPLIFIER TOPOLOGY | Class AB Switching Hybrid -BASH |
INPUT SENSITIVITY | 750mV Balanced, 0dBU |
INPUT IMPEDANCE | Balanced 40k |
MAXIMUM INPUT SIGNAL | +14dBU Inputs 1-4, +7dBU Inputs 5-8 with Dante™ |
THD | 1% @ Rated Output |
FREQUENCY RESPONSE | 20Hz - 20kHz (DSP Filters Set to Flat) |
SIGNAL TO NOISE RATIO | >100dB Below Rated output (A-Weighted) |
CROSSTALK | 73dB @ 1kHz |
VOLTAGE | 110V - 120V & 220V - 240V Auto Switch Over, 50/60Hz |
RACK UNITS | 1 |
HEIGHT | 1.75" (45mm) |
WIDTH | 19" (483mm) |
DEPTH | 15.5" (394mm) |
WEIGHT | 13 lbs. (5.92kg) |
VOLTAGE COMPATIBILITY | Universal |
Customers Also Bought
DPA-DAC4
DANTE ENABLED ACCESSORY CARD FOR USE WITH DPA2402/DPA1202/DPA602 & AZA404/AZA804
MAP: $548.99 / EA
DPA1202
2CH/3CH/4CH 1200W NETWORKABLE POWER AMPLIFIER WITH DSP -70V, 100V, 4O & 8O OPTIONS
MAP: $1,662.99 / EA
DPA804
4CH 800W NETWORKABLE POWER AMPLIFIER WITH DSP, 200W @ 70/100V, 150W @ 8OHM, 100W @ 4OHM
MAP: $1,676.99 / EA
DPA804
4CH 800W NETWORKABLE POWER AMPLIFIER WITH DSP, 200W @ 70/100V, 150W @ 8OHM, 100W @ 4OHM
MAP: $1,676.99 / EA
Customers Also Viewed
DPA-102PM
2CH 200W NETWORKABLE POWER AMPLIFIER WITH DSP SIGNAL PROCESSING AND POLE MOUNT CAPABILITY
MAP: $478.99 / EA
DPA1202
2CH/3CH/4CH 1200W NETWORKABLE POWER AMPLIFIER WITH DSP -70V, 100V, 4O & 8O OPTIONS
MAP: $1,662.99 / EA
DPA2402
2/4CH NETWORKABLE 2400W POWER AMPLIFIER / 2 X 1200W @ 70V/100V / 4 X 500W @ 4O / 4 X 300W @ 8O / 2RU
MAP: $1,883.99 / EA
DPA602
2CH/4CH 600W NETWORKABLE POWER AMPLIFIER WITH DSP, 2 X 300W @70V, 4 X 150W @ 4OHM / 1RU
MAP: $1,331.99 / EA
DPA804
4CH 800W NETWORKABLE POWER AMPLIFIER WITH DSP, 200W @ 70/100V, 150W @ 8OHM, 100W @ 4OHM
MAP: $1,676.99 / EA