DPA602 | 2CH/4CH 600W NETWORKABLE POWER AMPLIFIER WITH DSP, 2 X 300W @70V, 4 X 150W @ 4OHM / 1RU
DPA602
2CH/4CH 600W NETWORKABLE POWER AMPLIFIER WITH DSP, 2 X 300W @70V, 4 X 150W @ 4OHM / 1RU
DPA602
2CH/4CH 600W NETWORKABLE POWER AMPLIFIER WITH DSP, 2 X 300W @70V, 4 X 150W @ 4OHM / 1RU
- UM : EA
- Estimated Weight: 13.0
The AtlasIED DPA Series amplifiers feature a combination of flexibility, performance, and control to provide high value features for applications that require more than just great sound. The network enabled DPA series amplifiers are DSP controlled 4-channel amplifiers that can be configured in three different amplification arrangements to meet a wide range of installation design requirements.
Features
Configurations
2 x 300 Watt 70V / 100V (Factory Default)
4 x 150 Watt @ 4O
1 x 300 Watt 70V / 100V & 2 x 150 Watt @ 4O
No Computer Required to Operate
Networkable
Configurable DSP Via GUI
PC Based DPA Site Manager Software With LAN IP Auto- Discovery, Fault Reporting, Input & Output Status, Standby Status and Amplifier Remote Activation Via A Scheduler Timer
On-Board Web Browser GUI for Remote Monitoring of Status & Levels
User Page With Assignable Level Control, Post Contractor Settings, Password Protection
Mute Assignments Triggered Via Audio Signal or Contact Closure
Audio Sense Auto Power Down (APD)
DSP Parameters per Output, Parametric EQ, Hi & Lo Cut Filters, Delay, Limiter
Four (4) Balanced Inputs, Expandable to eight (8) via Accessory Card
Optional Accessory Card Slot for a DPA-DAC4 4-channel Dante™ receiver or a DPA-AMIX (2) Mic / Line, (2) AUX input card
PC, iOS®, & Android® Controllable
Assignable Level Controls, On Board GUI (Security Password Protected) or by Front Panel Pots with Tamper Deterring Covers
Four (4) GPIO Control Ports Assignable in GUI for Mute or Remote Level
Controllable From Third-Party Controllers
SPECIFICATIONS
POWER OUTPUT |
2 x 300-Watts @ 70.7V |
POWER OUTPUT |
2 x 300-Watts @ 100V |
POWER OUTPUT |
4 x 150-Watts @ 4O |
POWER OUTPUT |
4 x 75-Watts @ 8O |
POWER OUTPUT |
1 x 300-Watts @ 70.7V, 2 x 150-Watts @ 4O |
POWER OUTPUT |
1 x 300-Watts @ 100V, 2 x 150-Watts @ 4O |
AMPLIFIER TOPOLOGY |
Class AB Switching Hybrid -BASH |
INPUT SENSITIVITY |
750mV Balanced, 0dBU |
INPUT IMPEDANCE |
Balanced 40k |
MAXIMUM INPUT SIGNAL |
+14dBU Inputs 1-4, +7dBU Inputs 5-8 with Dante™ |
THD |
1% @ Rated Output |
FREQUENCY RESPONSE |
-3dB 20Hz - 20kHz (DSP Filters Set to Flat) |
SIGNAL TO NOISE RATIO |
-100dB Below Rated output (A-Weighted) |
CROSSTALK |
73dB @ 1kHz |
VOLTAGE |
110V - 120V & 220V - 240V Auto Switch Over, 50/60Hz |
IDLE CURRENT |
38W |
RACK UNITS |
1 |
HEIGHT |
1.72" (45mm) |
WIDTH |
19" (483mm) |
DEPTH |
14.5" (368mm) |
WEIGHT |
13.00 lbs. (5.92kg) |
VOLTAGE COMPATIBILITY |
Universal |
Customers Also Bought
Customers Also Viewed
DPA1202
2CH/3CH/4CH 1200W NETWORKABLE POWER AMPLIFIER WITH DSP -70V, 100V, 4O & 8O OPTIONS
MAP: $1,662.99 / EA
DPA404
4CH 400W NETWORK AMP, INTEGRATED DSP, 4X100W@70/100V, 4X75W @8OHM / SELECT 70V OR 8OHM PER CH / 1RU
MAP: $1,275.99 / EA
FX125.4
4CH NETWORK COMPACT POWER AMPLIFIER WITH DSP, 4 INPUTS, 4 X 125W @ 4OHM/8OHM, 2 X 250W @70V, 1/2RU
Call for Price