FA125.4 | 4CH POWER AMPLIFIER: 4 X125W @ 4OHM /8OHM, 25V /70V /100V, AUTO DSP FUNCTIONS, 1/2 RACK UNIT

FA125.4
4CH POWER AMPLIFIER: 4 X125W @ 4OHM /8OHM, 25V /70V /100V, AUTO DSP FUNCTIONS, 1/2 RACK UNIT

All models feature: front panel input level controls and channel status indicators, Power On/Standby, Remote GPIO for DC Level Control, Standby & Failure mode status along with switchable input sensitivity (-10/+4dB), remote standby polarity & front panel lockout. Built-in auto DSP functions such as 80Hz High-Pass Filter and Clip Limiter assure reliable performance.

The highly efficient Class D design is further enhanced by a Silent Active Cooling System; all have Auto Sleep/Wake Mode to assure low energy consumption when not in use.  Th FA-250.4 is rack-mountable via the supplied rack kit, and one or two FA-125s may be mount together with the optional rack kit.

• 125W x 2, 125W x4, 250W x 4 with Class D power supplies
• Silent Active Cooling System for noise-free operation
• Front Status LEDs, power switch and level controls (can be disabled for security)
• Remote GPIO for DC Level Control, Standby & Failure mode
• Switchable input sensitivity (-10/+4dB)
• Remote standby polarity & front panel lockout
• Built-in auto DSP functions such as 80Hz High-Pass Filter and Clip Limiter
• 70V and 100V capability
• Extensive protection circuitry
• Front panel power switch and level controls (can be disabled for security)
• USB Port for firmware updates
• 1U rack kit for one FA-250.4, or two FA-125.2s or FA-125.4s side-by-side
• Safety / Compliance: cTUVus, CE, FCC, RoHS

More Info