KLR-4000 | 2CH POWER AMPLIFIER 2 X (2000W @ 2) (1400W @ 4) (850W@ 8) OHMS
KLR-4000
2CH POWER AMPLIFIER 2 X (2000W @ 2) (1400W @ 4) (850W@ 8) OHMS
KLR-4000
2CH POWER AMPLIFIER 2 X (2000W @ 2) (1400W @ 4) (850W@ 8) OHMS
- UM : EA
- Estimated Weight: 31.2
Our KLR Series high-efficiency, high-power amplifiers are the ideal choice for high-output speaker systems, line arrays, dual 18” subwoofers and much more. If you think you need to use an expensive, European amplifier to get a clean, stable, quiet amplifier—think again. KLRs are quiet, with signal-to-noise ratio ratings from >108 dB to >110 dB across all models. Each with a 3-position gain switch for both channels, a 3-position mode switch (bridged, stereo or parallel mono) and a 3-position 12dB/oct HPF switch (30Hz, 50Hz or off).
FEATURES
- Optimized to deliver high levels of sustained power
- 2 RU configuration
- Stable down to 2 Ohms
- KLR-3200 offers 70V operation
- Balanced inputs via 3-pin Euroblock
- Combo XLR/TRS connectors
- Neutrik speakON output connectors
- 30 Hz, 6 Hz, Off High Pass filter
- Switch-mode power supply with extensive protection circuitry
- On/Off limiter switch
- Forced-air cooled (front-in, rear-out)
- Removable, easy-to-clean dust filters
- Front-mounted attenuators
- Removable amp handles for permanent installation
- Optional locking front panel volume knobs
- Safety/Compliance: cCSAus, CE, FCC, RoHS
- KLR-2000 output topology: Class-AB; KLR-3200, 4000, and 5000 output topology: 2-step Class-H design
KLR Models | 2000 | 3200 | 4000 | 5000 |
Max Output Power: Per Channel, 20HZ-20KHz, 1%THD, Both Channels Driven | ||||
2 Ohms | 1,000W | 1,600W | 2,000W | 2,500W |
4 Ohms | 600W | 1,100W | 1,400W | 1,700W |
8 Ohms | 350W | 650W | 850W | 1,000W |
Bridge Mode, 20Hz-20KHz, 1%THD | ||||
4 Ohms | 2,000W | 3,200W | 4,000W | 5,000W |
Constant Voltage Options: Per Channel, 20Hz-20KHz, 1%THD | ||||
70V | - | 800W* | - | - |
Line Current Draw: 120VAC 60Hz, All Channels Driven @ 4 Ohms | ||||
Idle | 0.99A | 0.92A | 1.05A | 1.14A |
1/8th Power (Pink Noise | 9.7A | 11.4A | 14.0A | 17.5A |
1/3 Power (Sine Wave) | 14.9A | 16.6A | 19.8A | 24.7A |
Thermal Dissipation: BTU/hr, All Channels Driven | ||||
Idle | 164 | 136 | 171 | 215 |
1/8th Power (Pink Noise | 1,876 | 2,063 | 2,489 | 3,111 |
1/3 Power (Sine Wave) | 2,880 | 3,001 | 3,516 | 4,395 |
Additional Specs | ||||
Signal-to-Noise (10Hz-20KHz, unweighted) | >108dB | >109dB | >109dB | >110dB |
Inpout Gain Switch | 1V, | 1V, | 1V, | 1V, |
Output Circuitry | Class AB | 2-Step Class H | 2-Step Class H | 2-Step Class H |