SM35-TQG | HEADSET CARDIOID CONDENSER MIC WITH SNAP-FIT WINDSCREEN AND TA4F (TQG) CONNECTOR
SM35-TQG
HEADSET CARDIOID CONDENSER MIC WITH SNAP-FIT WINDSCREEN AND TA4F (TQG) CONNECTOR
SM35-TQG
HEADSET CARDIOID CONDENSER MIC WITH SNAP-FIT WINDSCREEN AND TA4F (TQG) CONNECTOR
- UM : EA
- Estimated Weight: 1.0
The SM35 Performance Headset Condenser Microphone gives multi-instrumentalists the freedom to express themselves without sacrificing sound quality. A tight, unidirectional cardioid polar pattern provides excellent rejection of off-axis sound sources to prevent feedback and signal bleed onstage, whether in use in small clubs, large installations, or arena tours.
Features
Wireframe headset fits securely and comfortably for active performers and multi-instrumentalists
Tight, unidirectional cardioid polar pattern rejects signal bleed and feedback for use on loud stages and behind floor monitors
Flexible gooseneck design allows for optimized placement that further improves source isolation
Lightweight and low-profile form enables comfortable, long-wearing use
TA4F (TQG) connector is compatible with any Shure wireless bodypack
Locking snap-fit windscreens tame plosives, breath, and wind noise for clean and intelligible sound
Tailored frequency response refined for clear, crisp vocal reproduction
Included in BLX and GLX-D wireless systems, renowned for their ease of use and reliable performance
Legendary Shure precision engineering for durability and performance
|
Type |
Electret Condenser |
|
Frequency Response |
40 Hz to 20,000 Hz |
|
Polar Pattern |
Unidirectional (Cardioid) |
|
Output Impedance |
100 O, @ 1 kHz |
|
Sensitivity |
-57.8 dBV/Pa, @ 1 kHz, 1000 O load |
|
Signal-To-Noise Ratio [1] |
59.2 dB, @ 1 kHz, 1000 O load |
|
Maximum SPL [1] |
151.3 dB, 1000 O load, @ 1 kHz, 1% THD |
|
Dynamic Range [1] |
116.5 dB, @ 1 kHz, 1000 O load |
|
Self Noise [1] |
34.8 dB SPL-A, 1000 O load |
|
Cable |
1.1m (45in.) |
|
Connector |
TA4F or XLR |
|
Weight |
72 g (2.53 oz.) |
[1] Measurements taken using RPM400 preamp
*All specifications measured with a 48 Vdc phantom power supply. The microphone operates at lower voltages, but with slightly decreased headroom and sensitivity.
Customers Also Bought
