VX-015DA AMQ | DIGITAL POWER AMPLIFIER FOR VX-3000 SYSTEMS
VX-015DA AMQ
DIGITAL POWER AMPLIFIER FOR VX-3000 SYSTEMS
VX-015DA AMQ
DIGITAL POWER AMPLIFIER FOR VX-3000 SYSTEMS
- UM : EA
Digital power amplifier used for the VX-3000 systems which is compliant with the European Standard EN54 for fire alarm systems. It is a module type with 1 channel of class-D digital power amplifier, which contribute to energy-saving and light weight design. The VX-015DA also features standby mode to be set for reducing standby power consumption. It requires a dedicated control units VX-3004F, VX-3008F, VX-3016F and power supply unit VX-3000DS.
Features
Low loss modular class-D amplifiers
Modules to be mounted in the frame units
Power level: 150 W
Can easily be removed or replaced simply by unplugging them; no need for special tools
Dust filter, easy to clean
100 V Output without transformer resulting in light-weight units
Fuse easily accessible from rear
Power Source | 31 V DC (operating range: 20 to 33 V DC), DC power in: M4 screw terminal, distance between barriers: 11 mm (0.43") |
Amplification System | Class D |
Power Consumption | 40 W at 31 V DC |
Rated Output | 150 W (at 100 V line and min. impedance and max. capacitive load), 105 W (at 70 V line and min. impedance and max. capacitive load), 75 W (at 50 V line and min. impedance and max. capacitive load) (at AC Mains VX-3000DS or VX-3150DS: 187 to 253 V) |
Output Voltage | 100 V (70 V, 50 V: selectable) |
Minimum Impedance Load | 67 O (at 100 V line), 47 O (at 70 V line), 33 O (at 50 V line) |
Maximum Capacitive Load | 0.5 µF |
Number of Channels | 1 |
Input | DA CONTROL LINK: Nylon connector (15 pins) |
Output | DA OUTPUT LINK: Nylon connector (2 pins) |
Frequency Response | 40 Hz to 20 kHz: -5 to +1 dB (at 100 V line, 30 dB* output) |
Distortion | 1% or less (at 100 V line, rated output, 1 kHz) |
Signal to Noise Ratio | 100 dB or more (at 100 V line, A-weighted) |
Operating Temperature | -5 to +45 °C (23 to 113 °F) |
Operating Humidity | 90% RH or less (no condensation) |
Finish | Surface-treated steel plate |
Dimensions | 82.8 (w) x 91 (h) x 358.2 (d) mm (3.26" x 3.58" x 14.1") |
Customers Also Bought
VX-3004F AMQ
VX-3000 MAIN FRAME, UP TO 4 VX SERIES AMPLIFIERS (1 ZONE - 1 AMP)
MAP: $3,460.00 / EA
VX-3008F AMQ
VX-3000 MAIN FRAME, UP TO 3 VX SERIES AMPLIFIERS (8 ZONES SWITCHING BETWEEN 2 AMPS + STANDBY AMP)
MAP: $3,655.00 / EA
VX-3016F AMQ
VX-3000 MAIN FRAME,UP TO 2 VX SERIES AMPLIFIERS(16 SWITCHED ZONES+STANDBY AMP OR 2X8 SWITCHED ZONES)
MAP: $4,142.00 / EA