ADX12 | 12" MINIATURE GOOSENECK CONDENSER MICROPHONE, WITH UNIFORMLY CONTROLLED CARDIOID PATTERN / BLACK
ADX12
12" MINIATURE GOOSENECK CONDENSER MICROPHONE, WITH UNIFORMLY CONTROLLED CARDIOID PATTERN / BLACK
ADX12
12" MINIATURE GOOSENECK CONDENSER MICROPHONE, WITH UNIFORMLY CONTROLLED CARDIOID PATTERN / BLACK
- UM : EA
- Estimated Weight: 2.1
The ADX12 & ADX18 are professional miniature gooseneck condenser microphones designed for applications such as podium, presentation, meetings, and teleconferencing.
With a uniformly controlled cardioid polar pattern, the ADX12 & ADX18 help isolate the speaker from ambient noise. The ADX series is available in a hypercardioid polar pattern for tighter pick-up control.
The ADX12 and ADX18 are designed with integrated preamp circuitry built into the base of the XLR. They can be mounted permanently via the supplied flange mount or with an optional base with an internal shock mount (see model ATS10, ATS1, ATS1L). The microphone may also be used on a standard microphone stand using the DCLIP snap to fit the microphone holder.
Designed, manufactured, assembled, and tested by Audix in the USA.
|
Transducer Type |
Pre-Polarized Condenser |
|
Frequency Response |
40 Hz – 18 kHz |
|
Polar Pattern |
Cardioid/Hypercardioid |
|
Output Impedance |
150 ohms |
|
Sensitivity |
24 mV (C) / Pa @ 1k 30 mV (HC) / Pa @ 1k |
|
Equivalent Noise Level |
28 dB (A weighted) |
|
Signal to Noise Ratio |
66 dB |
|
Maximum SPL |
=120 dB |
|
Power Requirements |
18 – 52 Volts phantom |
|
Connector |
3-pin XLRm |
|
Polarity |
Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector |
|
Materials / Finish |
Machined Aluminum / Black Finish |
|
Weight |
113 g / 4 oz (ADX12) 159 g / 5.6 oz (ADX18) |
|
Length |
403 mm / 16 in (ADX12) 558 mm / 22 in (ADX18) |
Customers Also Bought
ATS10
HEAVY DUTY SHOCK ABSORBENT TABLE STAND WITH LATCHING ON/OFF LED SWITCH AND LED CONNECTOR
MAP: $129.00 / EA
