AM5215/95-WRC | MEDIUM POWER 15” 2-WAY FULL-RANGE LOUDSPEAKER SYSTEM WITH JBL DIFFERENTIAL DRIVE 50.8 MM (2-IN)
AM5215/95-WRC
MEDIUM POWER 15” 2-WAY FULL-RANGE LOUDSPEAKER SYSTEM WITH JBL DIFFERENTIAL DRIVE 50.8 MM (2-IN)
AM5215/95-WRC
MEDIUM POWER 15” 2-WAY FULL-RANGE LOUDSPEAKER SYSTEM WITH JBL DIFFERENTIAL DRIVE 50.8 MM (2-IN)
- UM : EA
- Estimated Weight: 46.0
AM5215/95-WRC is a 15-inch 2-way loudspeaker system featuring a rotatable horn with 90° by 50° coverage. It includes a JBL Differential Drive low-frequency driver (265H-1) with dual voice coils and dual magnetic gaps, measuring 380 mm (15 in) in diameter. The high-frequency component is a 2408H-1 compression driver with a 38 mm (1.5 in) exit and voice coil. The loudspeaker employs a large-format PT Progressive Transition waveguide that supports various coverage patterns and can be rotated to accommodate vertical or horizontal mounting orientations. The system incorporates high-slope passive crossover networks to reduce frequency band overlap and provides controlled off-axis frequency response to support array configurations.
Features:
- 90° x 50° coverage
- 265H-1 differential drive low-frequency driver
- 2408H-1 high-frequency compression driver
- Large PT progressive transition waveguide for pattern control and low distortion
- Rotatable waveguide for vertical or horizontal orientation
- Bi-amp/passive switchable
- WRC weather-resistant finishes
| Frequency Range | 35 Hz - 20 kHz |
|---|---|
| Frequency Response | 41 Hz – 18 kHz |
| Coverage Pattern | 60° x 40° / 60° x 60° / 90° x 50° / 120° x 60° |
| Directivity Factor (Q) | 14.5 |
| Directivity Index (DI) | 11.6 dB |
| Crossover Modes | Bi-amp/Passive switchable |
| Passive Crossover Frequency | 2 kHz |
| Transducer Power Rating (AES) | LF 500 W (2000 W peak), 2 hrs; 350 W (1400 W peak), 100 hrs; HF 40 W (160 W peak), 2 hrs |
| System Power Rating | Passive mode 350 W (1400 W peak), 100 hrs |
| Maximum SPL (1m) | Bi-amp mode LF 125 dB-SPL cont avg; HF 131 dB-SPL cont avg |
| System Sensitivity (1W @ 1m) | Passive mode 98 dB SPL |
| LF Driver | 1 x JBL 265H-1 15 in driver with 2 in dual voice coil |
| Nominal Impedance | 8ohms |
| Sensitivity (1W @ 1m) | 99 dB SPL |
| HF Driver | JBL 2408H-1, 1.5 in exit compression driver, 1.5 in voice coil |
| Sensitivity | 115 dB SPL |
| Waveguide | PT-H66HF-1 |
| Enclosure | Trapezoidal with 15 degree side angles, 16 mm exterior grade 11-ply birch plywood |
| Suspension Attachment | 15 points, M10 threaded hardware |
| baffle | Powder coated 14 gauge perforated steel with acoustic foam backing |
| Input Connector | NL4 Neutrik Speakon and CE-compliant covered barrier strip terminals |
| Environmental | Mil-Std 810; IP-x3 per IEC529 |
| Nominal LF Driver Impedance | 8ohms |
| Nominal HF Driver Impedance | 8ohms |
