ASB6125-WRX | DUAL 15” HIGH-POWER SUBWOOFER SYSTEM. 2 X 2265H-1 DIFFERENTIAL DRIVE WOOFER,

  • Call for Price
  • Log in to see if custom discounts apply
  • Case Quantity: 1
  • Sign In or Submit RFQ for accurate lead times
DUAL 15” HIGH-POWER SUBWOOFER SYSTEM. 2 X 2265H-1 DIFFERENTIAL DRIVE WOOFER,
Click image to enlarge

ASB6125-WRX
DUAL 15” HIGH-POWER SUBWOOFER SYSTEM. 2 X 2265H-1 DIFFERENTIAL DRIVE WOOFER,

  • UM : EA
  • Estimated Weight: 97.0

ASB6125-WRX is a front-loaded, vented subwoofer enclosure containing two JBL 2265H-1 Differential Drive 15-inch woofers. Each woofer features dual voice coils and dual gaps, utilizing neodymium magnets and cones designed for enhanced durability. The enclosure is designed for high power output while maintaining a lightweight form factor.

Features:

  • 15" Differential Drive dual voice coil dual gap neodymium magnet transducers
  • 1600W continuous pink noise power handling
  • 6400W peak power handling
  • Parallel/Discrete switchable input mode
  • Large vent area for high output and low distortion
  • FIR Tuning to match phase profile to full-range models
  • Suitable for ground-stacked or suspended applications
  • Compatible with AE Series products
Frequency Range 32 Hz - 1 kHz
Frequency Response 38 Hz - 1 kHz
Transducer Power Rating (AES) 1600 W (6400 W peak), 2 hrs
Input Modes Drivers Parallel / Drivers Discrete
System Power Rating 1350 W (5400 W peak), 100 hrs
Maximum SPL (1m) 35 Hz - 400 Hz: 132 dB-SPL continuous average (138 dB peak)
System Sensitivity 35 Hz - 400 Hz: 100 dB-SPL, 1W (2.0V) @ 1m
Nominal Impedance 4ohms in parallel-drive mode; 2 x 8ohms in discrete-drive mode
LF Driver 2 x 2265H-1, 15 in dia, 3 in Dual Coil Dual Gap neodymium Differential Drive drivers
Enclosure Rectangular cabinet, 16 mm exterior grade 11-ply birch plywood
Suspension Attachment 16 points, M10 threaded hardware
Finish Black DuraFlex finish; White available upon request
baffle Powder coated 14 gauge perforated steel with acoustically transparent black foam backing
Input Connector NL4 Neutrik Speakon and CE-compliant covered barrier strip terminals; barrier terminals accept up to 5.2 sq mm wire or max width 9 mm spade lugs; Speakon in parallel with barrier strip for loop-through
Environmental Mil-Std 810; IP-x3 per IEC529
Nominal LF Driver Impedance 4ohms in parallel-drive mode; 2 x 8ohms in discrete-drive mode

Customers Also Bought

SET OF THREE M10 X 35MM FORGED SHOULDER STEEL EYEBOLTS (PRICED AND SHIPPED AS PACK OF 3 BOLTS)

229-00009-01

SET OF THREE M10 X 35MM FORGED SHOULDER STEEL EYEBOLTS (PRICED AND SHIPPED AS PACK OF 3 BOLTS)

MAP: $75.00 / EA

Qty:
Item Added to Cart View Cart
Wishlist Updated View Wishlists
This website uses cookies to ensure you get the best user experience. By continuing to use this site, you agree to our cookies and terms of use policy.