BC7-12 | BEAM CLAMP, 7-12", 1 TON W/SWIVEL EYE - CHANNEL STYLE WITH ONE SUSPENSION POINT
BC7-12
BEAM CLAMP, 7-12", 1 TON W/SWIVEL EYE - CHANNEL STYLE WITH ONE SUSPENSION POINT
BC7-12
BEAM CLAMP, 7-12", 1 TON W/SWIVEL EYE - CHANNEL STYLE WITH ONE SUSPENSION POINT
- UM : EA
- Estimated Weight: 8.6
Standard, pre-engineered channel style beam clamps anchor to a building’s structure and offer a safe and predictable method of rigging grids, clusters, arrays and other objects from overhead. This channel style beam clamp is adjustable and mounts flush underneath the building’s I-Beams flanges. It comes equipped with a centrally located rigging point for suspending objects from wire rope, rigging chain, spansets, etc.
Use one of two channel style beam clamps to provide a load rated overhead rigging point from structural I-Beams with flange widths ranging between 3” 12”(305mm). This beam clamp model provides a fast, easy and safe way to rig direct loads, bridles and hitches from overhead and a hand wrench is all that is required to secure this clamp. The beam flanges must be parallel to the floor to achieve the stated working loads.
Features
Single load-rated center hang point
Provides safe load-rated hang point to 45° off center.
Two models secure to beam flanges ranging from 7” – 12” / 178mm to 305mm
|
Material |
All Steel Components |
|
Width |
(BC7-12) 7” to 12” / 178mm to 305mm |
|
Finish |
Powder Coat |
|
Color |
Black |
|
WLL |
1600 lb / 725.7478 Kg (VERTICAL) on metal beams and 300lb / 136kg max on wooden beams |
|
Design Factor |
5:1 |
|
45 DEG. WL |
1280 lb / 580.5982 Kg |
|
DO NOT EXCEED 45° off hang points |
|
