CDI4X300 | 4CH POWER AMPLIFIER / PER CHANNEL: 300W @ 4O & 8OHM, 150W @ 2 & 16OHM, 300 WATTS @ 70V & 100V

The Crown CDi 4|300 is an analog-input, 4-channel DriveCore Series power amplifier designed for professional installed sound applications where flexible multi-channel amplification, DSP, and network control are needed in a compact commercial AV system. The CDi 4|300 delivers 300W per output channel and supports low-impedance and high-impedance speaker systems, including 70V and 100V direct drive applications without requiring a transformer. Crown’s CDi DriveCore platform includes network control and monitoring through HiQnet Audio Architect, onboard DSP, a front-panel interface, GPIO/AUX control, and pre-loaded JBL speaker tunings to help integrators streamline setup for small to medium-sized installations such as restaurants, retail stores, houses of worship, education spaces, hospitality venues, and commercial distributed audio systems.

Features:

• DriveCore Technology – Crown’s proprietary DriveCore technology eliminates hundreds of components within each amplifier, reducing the variability of component values, increasing reliability, resulting in incredible audio fidelity from an efficient design.
• Network Control and Monitoring – Through Harman’s HiQnet Audio Architect software, the CDi DriveCore can be controlled, configured, and monitored through standard TCP/IQ network.
• DSP – On-board Digital Signal Processor in each amplifier allows for custom configuration. The DSP includes: Input Router, Input Delay – Up to 1000ms, Input Parametric EQ – 8 band, Crossover, Output Parametric EQ – 8 band, Output Delay – Up to 100ms, LevelMAX Limiter
• BLU link (BL models only) – Both receive and send channels over HARMAN’s 256 channel, fault-tolerant audio BUS, BLU link
• Direct Drive 70/100Vrms Output – Each output channel is capable of provide either 70V or 100V for high impedance applications.
• Front-Panel Interface – Completely configure the amplifier using an intuitive front-panel interface.
• GPIO/AUX Port – Recall presets, mute channels, monitor faults, power on/off the amplifier, and more through a combined GPIO/AUX Port.