CDI4X600 | 4 CHANNEL POWER AMPLIFIER 600 WATTS PER CHANNEL 70 VOLT/100 VOLTS, 4/8OHM, DIGITAL SIGNAL PROCESSING
CDI4X600
4 CHANNEL POWER AMPLIFIER 600 WATTS PER CHANNEL 70 VOLT/100 VOLTS, 4/8OHM, DIGITAL SIGNAL PROCESSING
CDI4X600
4 CHANNEL POWER AMPLIFIER 600 WATTS PER CHANNEL 70 VOLT/100 VOLTS, 4/8OHM, DIGITAL SIGNAL PROCESSING
- UM : EA
- Estimated Weight: 17.0
The CDi DriveCore Series is an evolution in amplification, providing an impressive mix of high-performance; rich feature set, and competitive cost. Using technology derived from our flagship Installed Sound amplifier (Crown DriveCore Install series), the CDi DriveCore 4|600 offers streamlined functionality to work in almost any medium sized installation such as cinema, houses of worship, bars, lounges, and more. Designed for ease-of-use in a variety of applications, the 4|600 is a 4-channel amp that includes network control/monitoring, high-level DSP, front-panel interface, and support for driving up to 100Vrms speaker loads without requiring a transformer. The entire CDi DriveCore line comes pre-loaded with JBL speaker tunings to help make installations quicker and easier.
| Blu link | No |
|---|---|
| Channels | 4 |
| Sensitivity (for full rated power at 8 ohms) | 0.7V RMS |
| Rated power output (per channel @ 4 ohms) | 600W |
| Analog input signal to noise ratio (ref. rated power, 100v, 20hz - 20khz) at 8 ohms) | > 104dB |
| Thd (full rated power, 20 hz - 20 khz) | 0.35% |
| Damping factor (20 hz to 100 hz) | > 1000 |
| Frequency response (8ω, 20 hz - 20 khz) | +/-0.25dB |
| Crosstalk (below rated power) 20 hz to 1 khz | > 80dB |
| Input impedance (nominally balanced, nominally unbalanced) | 20 kΩ balanced, 10 kΩ unblanced |
| Dimensions (inches) (w x h x d) (depth not including 1.3 inch front panel protrusion) | 19 x 3.5 x 12.25 |
| Weight | 16.3 lbs (7.39 kg) |
| Power supply connector | "15A IEC connector, 100 – 240V " |
| Product Specifications | |
|---|---|
| Brand | Crown |
Customers Also Viewed
CDI4X600BL
4 CHANNEL POWER AMPLIFIER 600 WATTS PER CHANNEL 70 VOLT/100 VOLTS, 4/8OHM, DIGITAL SIGNAL PROCESSING
MAP: $4,527.00 / EA
DPA2402
2/4CH NETWORKABLE 2400W POWER AMPLIFIER / 2 X 1200W @ 70V/100V / 4 X 500W @ 4O / 4 X 300W @ 8O / 2RU
MAP: $2,354.99 / EA
HPA2604
4CH 2600W COMMERCIAL AMPLIFIER / 4 X 650W @ 70V/100V AND 4/8 OHM - 4-BALANCED INPUTS / 2RU
MAP: $2,616.99 / EA
