CPS8.5 120V | 8CH POWER AMPLIFIER 500W INTO 2, OR 4 OHMS, OR 70V/100V DIRECT DRIVE, 2U,
CPS8.5 120V
8CH POWER AMPLIFIER 500W INTO 2, OR 4 OHMS, OR 70V/100V DIRECT DRIVE, 2U,
CPS8.5 120V
8CH POWER AMPLIFIER 500W INTO 2, OR 4 OHMS, OR 70V/100V DIRECT DRIVE, 2U,
- UM : EA
- Estimated Weight: 32.0
The Electro-Voice CPS8.5 amplifier offers eight independent Class-D Variable Load Drive (VLD) amplifier blocks, each one capable of delivering up to 500 Watts into Low-Z or High-Z loads. Per default, each channel can be configured individually for max. power output into either 2 O, 4 O, 70V- or 100Vnetworks without involvement of any output transformers. Being designed for professional audio installation market, special care was taken for long term cost of ownership parameters: In addition to remarkably low current consumption and heat dissipation, the CPS8.5 provides remote standby switching with just 5 Watts consumption in standby mode. An optional remote control module RCM-810 provides control and supervision features via IRIS-Net, including monitoring of amplifier status and real time load supervision. In addition, via RCM-810 the Variable Load Drive characteristics can be set for max. power output into any load between 2 O and 10 O, in steps of 0.1 O.
FEATURES
- - Eight channels in one compact rack-efficient unit
- - 500 W per channel
- - 70/100 V operation for distributed systems
- - Class-D design for optimum efficiency
- - Slot for optional RCM-810 module, allowing IRIS-Net control and monitoring
- - IRIS-Net selection of each channel's impedance (2-10 O in 0.1 O steps)
- - Rear-mounted attenuators
- - Switchable 50 Hz high-pass filter (Hi-Z mode)
- - Complete protection: thermal, overload, shorts, HF, DC, back-EMF, inrush current
- - Phoenix-type input and output connections
- - Remote power-on/off contact
- - Programmable power-on delay settings
- - Front-to-rear fans
