DA-250FH CU | DIGITAL POWER AMPLIFIER- 4X 250 W @ 70V- 2X 500 W @ 140V (1U)
DA-250FH CU
DIGITAL POWER AMPLIFIER- 4X 250 W @ 70V- 2X 500 W @ 140V (1U)
DA-250FH CU
DIGITAL POWER AMPLIFIER- 4X 250 W @ 70V- 2X 500 W @ 140V (1U)
- UM : EA
- Estimated Weight: 17.0
The DA-250FH is a 4-Channel Digital Power Amplifier designed for 70 V line high-impedance distribution and features lightweight, compact, high power output, and high efficiency. It delivers 250 W × 4 channels (19.6 O output) using a switching power supply. Each channel is equipped with an independent power section. It can be electrically isolated from the high-impedance speaker system by attaching the MT-251H Output Transformer (optional). It can be mounted in an EIA Standard equipment rack (1 unit size).
|
Power Source |
120 V AC, 50/60 Hz |
|
Amplification System |
Class D |
|
Power Consumption |
200 W (based on UL/CSA standards), 1200 W (rated output 70 V line, 19.6 O × 4) |
|
Input |
4 circuits, +4 dB* (1.23 V) (input level control in maximum position),, 10 kO, electronically-balanced, removable terminal block (3 pins), CH 1 mode ON/OFF switch (ON: CH 1 to All ch, OFF: Each ch) |
|
Rated Output |
4 channels: 250 W × 4 (70 V line, 19.6 O), 2 channels (BRIDGE): 500 W × 2 (140 V line, 39.2 O), M4 screw terminal, distance between barriers: 8.8 mm |
|
Frequency Response |
20 - 20,000 Hz (±1 dB): HPF OFF/50 - 20,000 Hz (-3 dB, +1 dB): HPF ON (selectable with the inner jumper) |
|
Total Harmonic Distortion |
0.1% (1 kHz), 0.3% (20 - 20,000Hz): HPF OFF, 0.1% (1 kHz), 0.3% (100 - 20,000 Hz): HPF ON |
|
Protection Circuit |
Protection against excessive current flow due to overload, short circuit, unusual DC voltage output, temperature rise at power amp. heat sink (110? or more), temperature rise inside the unit (80? or more) |
|
S/N Ratio |
100 dB (A-weighted) |
|
Crosstalk |
70 dB (A-weighted) |
|
LED Indicator |
Power (blue) × 1, Input (green) × 4, Output (yellow) × 4, Peak (red) × 4, Protect (red) × 4 |
|
Cooling |
Forced air cooling |
|
Operating Temperature |
-10? to +40? |
|
Operating Humidity |
90% RH or less (no condensation) |
|
Finish |
Panel: Aluminum, black, alumite Case: Plated steel sheet |
|
Dimensions |
482 (W) × 44 (H) × 401.8 (D) mm |
|
Weight |
6.6 kg |
|
Accessory |
Power cord (2 m) ···1, Removable terminal plug (3 pins) ···4, Tamper-proof cap ···4 |
|
Option |
Matching transformer: MT-251H |
