DA-500F-HLCU | DIGITAL POWER AMPLIFIER- 4X 500W @ 70V & 8OHM, 4X 100W @ 4OHM, / 2RU

  • MAP: $2,850.10 / EA
  • List Price: $3,527.00 / EA
  • Log in to see if custom discounts apply
  • Case Quantity: 0
  • Usually ships in 3-7 days
DIGITAL POWER AMPLIFIER- 4X 500W @ 70V & 8OHM, 4X 100W @ 4OHM,  / 2RU
Click image to enlarge

DA-500F-HLCU
DIGITAL POWER AMPLIFIER- 4X 500W @ 70V & 8OHM, 4X 100W @ 4OHM, / 2RU

  • UM : EA
  • Estimated Weight: 25.8

The DA-500F-HL is a 4-Channel Digital Power Amplifier featuring lightweight, compact, high power output, and high efficiency. It delivers 500 W × 4 channels (70 V or 550 W into 8 O or 100 W into 4 O) using a switching power supply. Each channel is equipped with an independent power section. Its Control/Monitor terminals permit power ON/OFF control of the individual channels and status monitoring for the power ON/OFF on each channel, protection on each channel, and fan operation. Prepare the control panel or status monitor display panel separately. It can be mounted in an EIA Standard equipment rack (2 unit size).

Power Source

120 V AC, 50/60 Hz

Amplification System

Class D

Power Consumption

480 W (based on UL/CSA standards), 2600 W (rated output 8 O × 4)

Input

4 circuits, +4 dB* (1.23 V) (input level control in maximum position), 10 kO, electronically-balanced, removable terminal block (3 pins), XLR-3-31 type connector, CH 1 mode ON/OFF switch (ON: CH 1 to All ch, OFF: Each ch), HPF ON/OFF switch (-6 dB/oct, cut off frequency 50 Hz)

Rated Output

4 channels: 500 W × 4 (9.8 O, 70 V line), 550 W × 4 (8 O), 100 W × 4 (4 O), 2 channels (BRIDGE): 1000 W × 2 (19.6 O, 140 V line), 1100 W × 2 (16 O), M4 screw terminal, distance between barriers: 8.8 mm (0.35")

Frequency Response

20 - 20,000 Hz (-2 dB, +1 dB): HPF OFF, 50 - 20,000 Hz (-3 dB, +1 dB): HPF ON

Total Harmonic Distortion

0.1% (1 kHz), 0.3% (20 - 20,000 Hz): HPF OFF, 0.3% (100 - 20,000 Hz): HPF ON

Protection Circuit

Protection against excessive current flow due to overload, short circuit, unusual DC voltage, output, temperature rise at power amp. heat sink (100? or more (212?F)), temperature rise at power supply heat sink (80? or more (176?F))

S/N Ratio

100 dB (A-weighted)

Crosstalk

70 dB (A-weighted)

Control/Monitor

Control input: Power ON/OFF status of the individual channels, photocoupler input, drive voltage: 9 V DC (Min) - 14 V (Max), 12 V (Typ), Monitor output: Power ON/OFF status of the individual channels, Protection status of the, individual channels, Fan operation status, photocoupler open collector output, withstand voltage: 30 V DC, control current: Under 12 mA, Connector: RJ-45 connector × 2, Connection cable: Category 5 twisted pair cable for LAN (CAT5-UTP), Maximum cable distance: 600 m (656.17 yd)

LED Indicator

Power (blue) × 1, Input (green) × 4, Output (yellow) × 4, Peak (red) × 4, Protect (red) × 4

Cooling

Forced air cooling

Operating Temperature

-10? to +40? (14?F to 104?F)

Operating Humidity

90% RH or less (no condensation)

Finish

Panel: Aluminum, black, alumite Case: Plated steel sheet

Dimensions

482 (W) × 88.4 (H) × 404.2 (D) mm (18.98" × 3.48" × 15.91")

Weight

8.8 kg (19.4 lb)

Accessory

Removable terminal plug (3 pins) ···4, Tamper-proof cap ···4

Option

Matching transformer: MT-251H

 

 

More Info

Customers Also Viewed

DIGITAL POWER AMPLIFIER- 2X 250W @ 70V- 1X 500 W BRIDGED @ 140V (1RU)

DA-250DH CU

DIGITAL POWER AMPLIFIER- 2X 250W @ 70V- 1X 500 W BRIDGED @ 140V (1RU)

MAP: $1,179.70 / EA

Qty:
4 X 250W MATRIX MIXER-AMP W/DSP - 6 INPUTS (4 LINE, 2 MIC/LINE LEVEL) TO 4 OUTPUT CHANNELS

MA-725F-AM

4 X 250W MATRIX MIXER-AMP W/DSP - 6 INPUTS (4 LINE, 2 MIC/LINE LEVEL) TO 4 OUTPUT CHANNELS

MAP: $2,128.70 / EA

Qty:
Item Added to Cart View Cart
Wishlist Updated View Wishlists
This website uses cookies to ensure you get the best user experience. By continuing to use this site, you agree to our cookies and terms of use policy.