DCI4X600 | 4CH ANALOG INSTALL POWER AMPLIFIER, 600W PER CHANNEL @ 4OHM, 8OHM, 70V, 100V / 2RU

Crown DCi 4|600 is a four-channel DriveCore Install analog power amplifier designed for demanding permanent commercial and professional audio systems. It delivers 600W per channel into 4ohm or 8ohm loads and can directly drive 70V or 100V distributed speaker systems without external step-up transformers.

Each amplifier channel can be configured for high-impedance or low-impedance operation, allowing the DCi 4|600 to support different speaker system types from the same amplifier chassis. Channel pairs can also be bridged for higher-power applications, providing up to 1200W into appropriate 8ohm, 16ohm, 140V, or 200V loads.

The 2RU amplifier is well suited for schools, houses of worship, theaters, sports facilities, hospitality, paging systems, commercial AV installations, and other fixed sound systems requiring substantial multi-channel power with flexible low-Z and constant-voltage operation.

Features:

• TRUE RACK DENSITY – Power points of 300W or 600W in 2-/4-/8-channel configurations – all in a 2 Rack Unit form factor. More channels in one box allow smaller infrastructure rooms that can reduce operational costs while giving you the utmost in installation flexibility.
• DIRECT DRIVE CONSTANT VOLTAGE – Save money by using smaller gauge wiring to drive the speakers using either 70V rms or 100Vrms. With no need for a step-up transformer at the output, the DCi produces higher audio quality much more efficiently. 
• CHANNEL INDEPENDENT HI-Z/LOW-Z SELECTION – Drive either one or two speakers in low-Z mode, or literally hundreds of speakers in high-Z mode (70Vrms or 100Vrms). This means better design flexibility since DCi powers all loads on a channel-by-channel basis.
• BRIDGEABLE CHANNEL PAIRS – Unlike amps from other manufacturers, the DCi Series channels are bridgeable – even in 100Vrms mode – which means even more adaptability for higher power applications such as subwoofers.
• REMOTE ON/OFF INTERFACE – Save power by integrating the amplifier into a control system so you can easily turn it on and off.
• EFFICIENT COOLING DESIGN – Highly efficient internal cooling fans provide airflow to the most heat-generating parts. Incorporating the fans into the amplifier brick design maximizes cooling while minimizing wasted energy and noise.
• ADVANCED POWER FACTOR CORRECTION (PFC) UNIVERSAL POWER SUPPLY – The most advanced power supply in an installation amplifier delivers power more efficiently in almost any condition than anyone else, resulting in less power dissipated and less heat in your racks.