DCI8X300DA | 8CH POWER AMPLIFIER 300W @ 4OHM 70V 100V WITH DANTE NETWORKED AUDIO SUPPORT & DSP

  • MAP: $7,200.00 / EA
  • List Price: $7,200.00 / EA
  • Log in to see if custom discounts apply
  • Case Quantity: 0
  • Sign In or Submit RFQ for accurate lead times
8CH POWER AMPLIFIER 300W @ 4OHM 70V 100V WITH DANTE NETWORKED AUDIO SUPPORT & DSP
8CH POWER AMPLIFIER 300W @ 4OHM 70V 100V WITH DANTE NETWORKED AUDIO SUPPORT & DSP
Click image to enlarge
8CH POWER AMPLIFIER 300W @ 4OHM 70V 100V WITH DANTE NETWORKED AUDIO SUPPORT & DSP
8CH POWER AMPLIFIER 300W @ 4OHM 70V 100V WITH DANTE NETWORKED AUDIO SUPPORT & DSP

DCI8X300DA
8CH POWER AMPLIFIER 300W @ 4OHM 70V 100V WITH DANTE NETWORKED AUDIO SUPPORT & DSP

  • UM : EA
  • Estimated Weight: 29.0

For applications that require Dante or AES67 networked audio, the Crown DriveCore Install DA Series provides a balanced combination of output power, channel count and speaker load flexibility along with proprietary DriveCore technology for superb efficiency and exemplary audio quality. The DCi DA Series includes a high-powered DSP with JBL speaker tunings, network control/monitoring, and the ability to drive 2/4/8/16 ohm, 70V and 100V speaker loads. The amp’s advanced capabilities and support for Dante Domain Manager makes it perfect for installations that have standardized on Dante for networked audio transport. This amplifier is EN 54-16 Compliant for life safety applications.

Features:

  • Integrated dante / aes67 networked audio – simplifies installation by enabling dante / aes67 networked audio signals to be sent directly to the amplifier. provides flexibility of installation options available with crown / harman's expansive line-up of drivecore install amplifiers. includes support for dante 4.0 firmware for integration with dante domain manager.
  • Network configuration, monitoring & control – better monitoring, control and audio manipulation with the hiqnet protocol over standard tcp/ip network. the hiqnet audio architect software allows for remote configuration, monitoring, and control of all aspects of the dci-da series amplifiers.
  • Programmable general purpose input/output port – gpio ports can be configured in many different ways, such as volume controls, recall presets, or to report errors to third-party control system.
  • DSP capabilities include the following: LevelMAX Limiters, Input/Output EQ, Crossover, Delay, Matrix Mixer, Speaker Line Monitoring
  • En 54-16 compliant for life safety applications - part 16 of the european union’s (eu) en 54 standard for fire detection and alarm systems has a specific requirement for voice alarms, which output messages in the form of a voice message rather than a traditional siren. this amplifier is certified as part of an en 54-16 vacie, meeting the stringent requirements of a life safety system to serve the needs of hospitality, large venue and other markets.
Output channels8
Frequency response (8ω, 20hz - 20khz)±0.25dB
Total harmonic distortion (at full rated power, 20hz - 20khz)0.35%
Damping factor (20hz to 100hz)>1000
Load impedance (stereo/dual mode)2Ω - 16Ω
70Vrms and 100Vrms
Load impedance bridge mono4Ω - 16Ω
140Vrms and 200Vrms
CoolingContinuously variable speed forced air, front to back airflow
Maximum fan noise (re dba spl @ 1m)47
Required ac mains (±10%)100V-240V ~ 50/60Hz
Power connector20A IEC

Customers Also Viewed

8CH POWER AMPLIFIER 8 X 300W @ 4 OHM, 8OHM, 70V 100V / DRIVECORE INSTALL ANALOG SERIES

DCI8X300

8CH POWER AMPLIFIER 8 X 300W @ 4 OHM, 8OHM, 70V 100V / DRIVECORE INSTALL ANALOG SERIES

MAP: $5,570.00 / EA

Qty:
Item Added to Cart View Cart
Wishlist Updated View Wishlists
This website uses cookies to ensure you get the best user experience. By continuing to use this site, you agree to our cookies and terms of use policy.