DL107 NET | INDUCTION LOOP AMPLIFIER WITH NETWORK CONTROL. SINGLE OUTPUT (9.5 AMPS) FOR PERIMETER OR
DL107 NET
INDUCTION LOOP AMPLIFIER WITH NETWORK CONTROL. SINGLE OUTPUT (9.5 AMPS) FOR PERIMETER OR
DL107 NET
INDUCTION LOOP AMPLIFIER WITH NETWORK CONTROL. SINGLE OUTPUT (9.5 AMPS) FOR PERIMETER OR
- UM : EA
- Estimated Weight: 11.0
Digi-Loop is definitely state-of-the-art – the first of its kind to maximize modern amplifier technology. Its network-control capability provides seamless, remote system set-up, operation and monitoring via laptop or tablet. DSP audio processing offers flexible, powerful software control of mixing, equalization, compression and more. Powerful Class D, pulse-width amplifiers maximize efficiency. The Digi-Loop’s amplifier design offers either single or dual 9.5 A rms loop outputs for perimeter loop(s), single array(s), dual loop, or phased-array configuration. A 70-100 V input provides connection to a distributed speaker/paging system, ensuring announcements are heard by loop users.
FEATURES
- - Network control - allows control and calibration of unit remotely with application software
- - High continuous current 9.5 Arms (13.4 Apk) per output continuous
- - LCD Screen with VU metering, easy one-button menu control
- - DSP Audio Processing
- - USB for firmware updates
- - Input mixing, parametric equalization, compression, metal compensation, high and low-pass filters, AGC and audio delay
- - Power-save mode
- - Adjustable output delay for multiple amps in large venues
- - Fault warning and active protection against shorted or open circuits and overheating
- - Loop fault relay output
- - XLR and 3-position terminal block input configurable as microphone input or line-input, balanced or unbalanced.
- - Standard 1 RU, 19” rackmount
- - Magnetic signal couples directly to devices equipped with telecoils (T-coils) such as hearing aids, cochlear implants, or optional loop receivers.
- - DL207 suitable for phased-array or dual-loop systems; DL107 suitable for perimeter loop or single array.
- - Phased-array mode automatically produces 90° phase shift in slave loop output
- - Meets IEC 60118-4 system performance requirements when integrated into a correctly designed and installed system.
- - Meets IEC Specification 60118-4 (when designed and commissioned properly)
- - Tested to IEC Specifications 62489-1 Benchmark Standards
WHAT’S INCLUDED
- - PLA DL107 NET Loop Amplifier
- - WLC 004 Line Cord (US)
- - IDP 009 ADA Wall Plaque (T-Coil)
