DPA-2011ES | 2011ES TWIN DIAPHRAGM CARDIOID MIC, SIDE CABLE, XLR
DPA-2011ES
2011ES TWIN DIAPHRAGM CARDIOID MIC, SIDE CABLE, XLR
Click image to enlarge
DPA-2011ES
2011ES TWIN DIAPHRAGM CARDIOID MIC, SIDE CABLE, XLR
- UM : EA
The 2011 Twin Diaphragm Cardioid Mic is a directional microphone. The distinctive sound of this microphone is well balanced. It bridges the gap between the extreme sound quality of DPA's pencil microphones and DPA's well-known lapel microphones.
Features:
- Blends clarity, richness and dynamics
- Twin diaphragm capsule technology
- Advanced interference tube technology
- Superb stage separation and level control
- Modular flexibility
| Directional pattern | Cardioid |
|---|---|
| Principle of operation | Pressure gradient, with interference tube |
| Cartridge type | Pre-polarized condenser, Twin Diaphragm Capsule |
| Frequency response | 20 Hz - 20 kHz |
| Effective frequency range, ±2 dB, at 30 cm (11.8 in) | 50 Hz - 17 kHz with 3 dB soft boost at 12 kHz |
| Sensitivity, nominal, ±2 dB at 1 kHz | 10 mV/Pa; -40 dB re. 1 V/Pa |
| Equivalent noise level, A-weighted | Typ. 20 dB(A) re. 20 µPa (max. 23 dB(A)) |
| Equivalent noise level, ITU-R BS.468-4 | Typ. 33 dB (max. 36 dB) |
| Rated output impedance | 100 Ω |
| Minimum load impedance | 2 kΩ |
| Cable drive capability | 100 m (328 ft) |
| Output balance principle | Impedance balancing |
| Common mode rejection ratio (CMRR) | > 40 dB |
| Power supply (for full performance) | P48 (Phantom Power) |
| Current consumption | 3.5 mA |
| Connector | XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase |
| Color | Matte black |
| Microphone diameter | 19 mm (0.75 in) |
| Microphone length | 51 mm (2.0 in) |
| Maximum output voltage, RMS | 2.2 V |
| Polarity | +V at pin 2 for positive sound pressure |
| Temperature range | -40°C to 45°C (-40°F to 113°F) |
| Relative humidity (RH) | Up to 90% |
| Sensitivity selection tolerance (at 1 kHz) | ±1.5 dB |
×
This website uses cookies to ensure you get the best user experience. By continuing to use this site, you agree to our
cookies and terms of use policy.