DPA-4006A | 4006A OMNI MIC

  • MAP: $2,960.00 / EA
  • List Price: $2,960.00 / EA
  • Log in to see if custom discounts apply
  • Case Quantity: 1
  • Sign In or Submit RFQ for accurate lead times
4006A OMNI MIC
Click image to enlarge

DPA-4006A
4006A OMNI MIC

  • UM : EA

The 4006 Omni Mic offers total transparency in any recording situation. It picks up incredible detail and depth of sound. The definition of its high-frequency characteristics across a wide range of instruments is impressive. It offers natural sound, high sensitivity, low noise-floor and linear frequency response from 10 to 20 kHz (±2 dB).

Features:

  • Acoustic authenticity
  • Linear throughout a large frequency bandwidth
  • Detailed and natural reproduction
  • High sensitivity and low noise floor
  • Excellent for concert halls and spot miking acoustical instruments
  • Modular flexibility
Directional patternOmnidirectional
Principle of operationPressure
Cartridge typePre-polarized condenser
Frequency response10 Hz - 20 kHz
Effective frequency range ±2 dB10 Hz - 20 kHz
Sensitivity, nominal, ±2 dB at 250 Hz36 mV/Pa; -28,9 dB re. 1 V/Pa
Equivalent noise level, A-weightedTyp. 15 dB(A) re. 20 µPa (max. 17 dB(A))
Equivalent noise level, ITU-R BS.468-4Typ. 27 dB (max. 29 dB)
Distortion, THD < 1%133 dB SPL RMS, 136 dB SPL peak
Dynamic rangeTyp. 121 dB
Max. SPL, THD 10%146 dB SPL peak
Switchable volume control, filters etc.0 dB / -20 dB
Rated output impedance200 Ω
Minimum load impedance2 kΩ
Cable drive capability100 m (328 ft)
Output balance principleImpedance balancing with powered Drive
Common mode rejection ratio (CMRR)> 60 dB
Power supply (for full performance)P48 (Phantom Power)
Current consumption2.8 mA
ConnectorXLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
ColorMatte black
Microphone diameter16 - 19 mm (0.6 - 0.75 in)
Capsule diameter16 mm (0.6 in)
Microphone length170 mm (6.7 in)
Maximum output voltage, RMS8.0 V
Polarity+V at pin 2 for positive sound pressure
Temperature range-40°C to 45°C (-40°F to 113°F)
Relative humidity (RH)Up to 90 %
Matching tolerance (frequency response and sensitivity)±0.5 dB
Phase deviation for kit< 5°
Item Added to Cart View Cart
Wishlist Updated View Wishlists
This website uses cookies to ensure you get the best user experience. By continuing to use this site, you agree to our cookies and terms of use policy.