DPA-4018V-B-SL1 | D:FACTO 4018V SOFTBOOST SUPERCARDIOID MIC, SL1 ADAPTER (SHURE/SONY/LECTROSONICS/LINE6), BLACK
DPA-4018V-B-SL1
D:FACTO 4018V SOFTBOOST SUPERCARDIOID MIC, SL1 ADAPTER (SHURE/SONY/LECTROSONICS/LINE6), BLACK
                             Click image to enlarge
                        
                DPA-4018V-B-SL1
D:FACTO 4018V SOFTBOOST SUPERCARDIOID MIC, SL1 ADAPTER (SHURE/SONY/LECTROSONICS/LINE6), BLACK
- UM : EA
 
The d:facto series brings true studio sound to the live stage and broadcasting studio. This version has a pre-programmed high-end boost has a 3 dB soft boost at 12 kHz. The modular nature of the d:facto series allows you to switch the capsule as well as the adapter, making it the most flexible vocal microphone available on the market.
Features:
- Extraordinarily natural sound
 - Perfectly uniform supercardioid directionality
 - High separation
 - Extreme spl handling
 - Low handling noise
 - Sleek design
 - Flexible adapter system fits most professional wireless systems
 
| Directional pattern | Supercardioid | 
|---|---|
| Principle of operation | Pressure gradient | 
| Cartridge type | Pre-polarized condenser | 
| Frequency response | 20 Hz - 20 kHz | 
| Effective frequency range ±2 dB, at 12 cm (4.7 in) | 40 Hz - 16 kHz with 3 dB soft boost at 12 kHz | 
| Sensitivity, nominal, ±2 dB at 1 kHz | 5 mV/Pa; -46 dB re. 1 V/Pa 2 mV/Pa; -54 dB re. 1 V/Pa with Adapter for wireless  | 
| Equivalent noise level, A-weighted | Typ. 19 dB(A) re. 20 µPa (max. 21 dB(A)) | 
| Distortion, THD < 1% | 136 dB SPL RMS, 139 dB SPL peak | 
| Dynamic range | Typ. 120 dB | 
| Max. SPL, THD 10% | 160 dB SPL peak | 
| Rated output impedance | 100 Ω | 
| Minimum load impedance | 1 kΩ | 
| Cable drive capability | 100 m (328 ft) | 
| Output balance principle | Impedance balancing with powered Drive | 
| Common mode rejection ratio (CMRR) | > 50 dB at 1 kHz | 
| Power supply (for full performance) | P48 (Phantom Power) | 
| Current consumption | Max 2.0 mA | 
| Connector | XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase | 
| Color | Matte black | 
| Microphone diameter | 52 mm (2.05 in) | 
| Capsule diameter | 19 mm (0.75 in) | 
| Microphone length | 205 mm (8.1 in) | 
| Maximum output voltage, RMS | 8 V | 
| Polarity | +V at pin 2 for positive sound pressure | 
| Temperature range | -40°C to 45°C (-40°F to 113°F) | 
| Relative humidity (RH) | Up to 90% | 
            
            ×
            
            
            
            
        
        
        
        
        
        
        
            
            
        
            
                This website uses cookies to ensure you get the best user experience.  By continuing to use this site, you agree to our
                cookies and terms of use policy.