DPA-4055 | 4055 KICK-DRUM MICROPHONE
DPA-4055
4055 KICK-DRUM MICROPHONE
Click image to enlarge
DPA-4055
4055 KICK-DRUM MICROPHONE
- UM : EA
The 4055 Kick Drum Mic delivers the renowned DPA sound, clarity and linear frequency response, both on axis and off axis. The mic captures the clear, true sound of a kick drum, whether it is used in classic, jazz, rock or any other genre. Its unique asymmetric design makes it easy to position, both inside and outside the drum. With its large, robust housing, wind damping foam, specially-designed shock mount the mic is ready to perform on any live stage
Features:
- Exceptional audio quality
| Directional pattern | Open Cardioid |
|---|---|
| Principle of operation | Pressure gradient |
| Cartridge type | Pre-polarized condenser |
| Frequency response | 20 Hz - 20 kHz |
| Effective frequency range ±2 dB, at 20 cm (7.9 in) | 40 Hz - 18 kHz with a 6 dB soft boost at 10 kHz |
| Sensitivity, nominal, ±2 dB at 1 kHz | 2 mV/Pa; -54 dB re. 1 V/Pa |
| Equivalent noise level, A-weighted | Typ. 27 dB(A) re. 20 µPa (max.29 dB(A)) |
| Equivalent noise level, ITU-R BS.468-4 | Typ. 39 dB (max. 41 dB) |
| Distortion, THD < 1% | 156dB SPL RMS, 159 dB SPL peak |
| Dynamic range | Typ. 132 dB |
| Max. SPL, THD 10% | 164 dB SPL peak |
| Rated output impedance | 380 Ω |
| Minimum load impedance | 2 kΩ |
| Cable drive capability | 100 m (328 ft) |
| Output balance principle | Impedance balancing with powered Drive |
| Common mode rejection ratio (CMRR) | > 55 dB |
| Power supply (for full performance) | P48 (Phantom Power) |
| Current consumption | 2.0 mA |
| Connector | XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase |
| Color | Matte black |
| Microphone diameter | 57 mm (2,24 in) |
| Capsule diameter | 17 mm (0.67 in) |
| Microphone length | 132 mm (5,19 in) |
| Maximum output voltage, RMS | 9.75 V |
| Polarity | +V at pin 2 for positive sound pressure |
| Temperature range | -40°C to 45°C (-40°F to 113°F) |
| Relative humidity (RH) | Up to 90% |
×
This website uses cookies to ensure you get the best user experience. By continuing to use this site, you agree to our
cookies and terms of use policy.