ERIS PRO 6 | 2-WAY BIAMPED, ACTIVE 6.5-INCH COAXIAL STUDIO MONITORS,1.25-INCH HIGH-FREQUENCY DRIVER,140W
ERIS PRO 6
2-WAY BIAMPED, ACTIVE 6.5-INCH COAXIAL STUDIO MONITORS,1.25-INCH HIGH-FREQUENCY DRIVER,140W
ERIS PRO 6
2-WAY BIAMPED, ACTIVE 6.5-INCH COAXIAL STUDIO MONITORS,1.25-INCH HIGH-FREQUENCY DRIVER,140W
- UM : EA
The Eris Pro 6's coaxial design provides a single acoustic point source that creates a natural listening experience, revealing the subtlest nuances in your recordings, while providing a three-dimensional soundstage, detailed transient response, and lifelike sonic reproduction. Combined with a punchy low-end that defies its compact size, the Eris Pro 6 provides a superior listening experience for both home studios and professional mix rooms.
A 1.25-inch, ultra-low mass, silk-dome tweeter ensures snappy, accurate transient reproduction, while a 6.5-inch, woven-composite woofer offers tight, clear bass, with plenty of punch and no flab. A ported enclosure and 140w of power allows the Eris Pro 6 to reach down to an astonishing 35 Hz, while a finely detailed transient response and stunning dynamics deliver a natural and less fatiguing experience.
Acoustic tuning controls and a three-way Acoustic Space tuning lets you accurately configure the Eris Pro 6 for your room. Flexible input options enable connection to almost any line-level source, from mixers to audio interfaces and more. Provisions for wall and ceiling mounts make it easy to integrate Eris Pro 6 monitors into any stereo or multi-channel system.
Features
Single point-source coaxial design for wider sweet spot and better phase alignment
6.5-inch, woven-composite, low-frequency driver
1.25-inch, silk-dome, high-frequency driver
140W, Class AB amplification
35 Hz to 20 kHz frequency response
106 dB SPL (Peak, @ 1 meter)
Acoustic Tuning Controls: Acoustic Space (Flat, -2 dB, -4 dB), High Frequency (±6 dB, center 10 kHz, continuously variable), Mid Frequency (±6 dB, center 1 kHz, continuously variable), Low Cut (Flat, 80 Hz, 100 Hz @ -12 dB / octave)
XLR and ¼-inch TRS balanced and RCA unbalanced rear-panel inputs
Protection: RF interference, output-current limiting, over-temperature, turn-on/off transient, subsonic filter
Power Saver mode (engages after 40 minutes)
Wall and ceiling mountable
Voltage Requirements |
100-240 VAC, 50-60 Hz |
Connection Type |
IEC |
Cabinet Material |
Vinyl-Laminated, Medium-Density Fiberboard |
Audio Switches |
Acoustic Space (Flat, -2 dB, -4 dB)Low Cut (Flat, 80 Hz, 100 Hz @ -12 dB / octave) |
Audio Controls |
Volume High Frequency (±6 dB, center 10 kHz, continuously variable); Mid Frequency (±6 dB, center 1 kHz, continuously variable) |
Peak SPL |
106 dB (at 1 Meter) |
Crossover Frequency |
3.2 kHz |
Monitor Inputs |
1- Balanced XLR, 1- Balanced 1/4” TRS, 1- Unbalanced RCA |
HF Transducers |
1.25” Silk Dome Tweeter (Coaxial) |
LF Transducers |
6.5" Woven Glass Fiber Composite (Coaxial) |
Frequency Response |
35 Hz - 20 kHz |
Input Impedance |
10 kO |
Monitor Amplifier Power |
140W Bi-Amped |
![2-WAY BIAMPED, ACTIVE 6.5-INCH COAXIAL STUDIO MONITORS,1.25-INCH HIGH-FREQUENCY DRIVER,140W](/images/enImages/Presonus/en_ERIS PRO 6.jpg)
![2-WAY BIAMPED, ACTIVE 6.5-INCH COAXIAL STUDIO MONITORS,1.25-INCH HIGH-FREQUENCY DRIVER,140W](/images/enImages/Presonus/en_ERIS PRO 6 Back.jpg)