HT2(AUD) | HEADSET MICROPHONE, CONDENSER, SUPERCARDIOID, HI SPL CAPABLE, 3' CABLE WITH MINI-XLR / BLACK
HT2(AUD)
HEADSET MICROPHONE, CONDENSER, SUPERCARDIOID, HI SPL CAPABLE, 3' CABLE WITH MINI-XLR / BLACK
HT2(AUD)
HEADSET MICROPHONE, CONDENSER, SUPERCARDIOID, HI SPL CAPABLE, 3' CABLE WITH MINI-XLR / BLACK
- UM : EA
- Estimated Weight: 1.0
The HT2 is a professional pre-polarized headset condenser microphone for stage, presentation and broadcast. The HT2 is known for its excellent sonic characteristics, low profile, comfort and sound isolation. Designed for use with the Audix RAD360 Wireless System, the HT2 is also available in a wired version (HT2P). With a uniformly controlled supercardioid polar pattern, the HT2 captures vocals from a comfortable distance of 2"-3" off axis. The HT2 handles very high SPLs without distortion. Easy to position and lightweight, the HT2 is manufactured with very tight tolerances. This mic has a rubber coated metal frame, a high performance 5 mm capsule and has a 3' high quality cable terminating in a space saving mini-XLRf connector.
1x HT2 Vocal Microphone
1x 3' captive microphone cable with mini XLRf connector
1x WSHT2 External foam windscreen
|
Transducer Type |
Pre-Polarized Condenser |
|
Frequency Response |
50 Hz – 15 kHz |
|
Polar Pattern |
Supercardioid |
|
Output Impedance |
250 ohms balanced |
|
Sensitivity |
4 mV / Pa @ 1k |
|
Equivalent Noise Level |
26 dB (A-weighted) |
|
Signal to Noise Ratio |
68 dB |
|
Maximum SPL |
=140 dB |
|
Power Requirements |
5 – 52 V phantom |
|
Connector |
3-pin or 4-pin XLRf |
|
Polarity |
Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector |
|
Materials / Finish |
Flexible Steel Alloy / Black |
|
Weight |
68 g / 2.4 oz |
|
Length |
176 mm / 6.9 in |
