LEA CS702D-ADSP | 2CH SMART AMP 700W-4OHM, 8OHM, AND 70V/100V P/CH, DANTE AND AES67 CONNECTIVITY,CONNECT SERIES
LEA CS702D-ADSP
2CH SMART AMP 700W-4OHM, 8OHM, AND 70V/100V P/CH, DANTE AND AES67 CONNECTIVITY,CONNECT SERIES
LEA CS702D-ADSP
2CH SMART AMP 700W-4OHM, 8OHM, AND 70V/100V P/CH, DANTE AND AES67 CONNECTIVITY,CONNECT SERIES
- UM : EA
The LEA CS702D-ADSP is a 2-channel amplifier delivering 700Wper channel. It features 96kHz linear phase FIR crossover filters with 2048 taps per channel, providing precise audio processing. The amplifier includes an input delay of up to 4 seconds and powers on to audio output within 10 seconds when using Power over Ethernet (PoE). FIR-based speaker tunings are integrated for optimized audio performance.
The CS702D-ADSP supports both analog and Dante digital audio inputs, with compatibility for Dante and AES67 protocols. It also offers external I/O control for remote on/off functionality and fault monitoring. The amplifier includes network connectivity for cloud-based remote control, monitoring, and notifications.
Features:
- 3 Ways To Connect: Built-in Wi-Fi Access Point, Existing Wi-Fi Network, Local Area Network
- Web Browser-Based Ui
- Cloud Control
- Direct Low-Z & Hi-Z
- Smart Power Bridge
- Universal Switch-Mode Power Supply
- Analog Balanced Inputs
- 96khz Analog Devices Dsp
- External I/O Port
- Highly Efficient Class-D Output Stage
| Inputs | Analog: 2 Balanced Inputs with user selectable 26 dB and 34 dB input sensitivity Dante: 8 x 8 Dante at 96kHz or 48kHz, multicast or unicast AES67: Configurable via the Dante Controller Software |
|---|---|
| Thd+N | 0.1% (20Hz to 20kHz) |
| Frequency Response | +/- 0.5 dB @ 4?, 8?, 70V, 100V, -2.5dB @ 20kHz at 2? |
| Signal To Noise Level | 105dB (20Hz to 20kHz referenced to 8?) |
| Crosstalk | 70dB (20Hz to 20kHz) |
| Amplifier Output Classification | Class D with Proprietary Smart Power Bridge Technology allowing bridged output functionality on one channel without sacrificing an amplifier channel |
| DSP Architecture | Analog Devices Sharc 96kHz DSP Processor with 32-bit Core with Sample Rate Converters |
| Input Matrix | Routable matrix any input to any output with primary and secondary input priority |
| Crossovers | Up to 48dB/Octave IIR Filters (Linkwitz Riley and Butterworth and Bessel). FIR filters (24db/oct & 48db/oct Linkwitz Riley, Linear Phase Brickwell, and ability to load FIR Coefficients – 2048 taps per channel @96 KHZ) |
| Parametric Eq | 8 Band Parametric EQ per channel |
| Output Delay | 4 seconds per channel |
| Output Protection | DC, VHF, and AC Mains Protection, Overtemp and Current Limiter, fan fault detection |
| User Adjustable Limiting | Peak Voltage and RMS Voltage |
| Load Monitoring | Realtime Load Monitoring and Pilot Tone Detection from Internal or External Sources |
| User Interface | Web Browser User Interface, 3rd Party API control, Cloud control, or SharkWare |
| External I/O | External I/O In: Toggles Remote On/Off External I/O Out: Indicates Amplifier Health |
| Ac Mains | 100VAC - 240VAC +/- 15% 50Hz or 60Hz |
| Power Supply | Universal Switch Mode Power Supply |
