MA-BT240 | MIXING AMPLIFIER WITH EXTENDED BLUETOOTH

MA-BT240
MIXING AMPLIFIER WITH EXTENDED BLUETOOTH

The MA-BT240 installation amplifier is your comprehensive mixing amplifier solution for smaller commercial applications. Combining high- and low-impedance amplification with a microphone input, line-level inputs, and built-in Bluetooth® for wireless audio streaming, the MA-BT240 is a versatile mixing amplifier for restaurants, retail stores, institutions, waiting rooms, and other small commercial spaces.

• Efficient Class D amplifier supports low-impedance (120W x 2ch @ 4O/8O) and high-impedance (240W x 1ch, 100V/70V) connections
• Equipped with Bluetooth® receiver for wireless music streaming from portable devices ADDITIONAL NOTE: Bluetooth® antenna can be extended from unit with commercially available RP-SMA wire, allowing you to place it in the optimal position for your specific space. (Maximum extension possible is approximately 20m/65ft from unit)
• 2 Line inputs
• Mic/Line input with switchable Ducking/Paging function to automatically mute background music during announcements
• 2-band EQ and high pass filter (recommended for high-impedance applications) on output allow you to fine-tune the system response
• Built-in mixing with front-panel knobs for all inputs
• Master volume can be adjusted remotely from external controllers (sold separately) / * External controller must conform to the control terminal specifications of the unit. Euro block 3.81mm pitch 3-pin (1: Vcc 5V / 2: Control / 3: GND)
• Output can be optimized for any speaker configuration with Mono/Stereo switching (low-impedance mode)
• Line output allows you to create additional zones by cascading to other power amplifiers
• Compact 1U half-rack design for convenient placement on desktop or shelf
• Can be rack mounted with optional AK-RM05 rack kit (sold separately)

What’s in the box

• MA-BT240 x 1
• Power cord x 1
• Bluetooth Antenna x 1
• Euroblock plugs:
  - For Speaker output
  5.08 mm pitch (2 pin) for high impedance x 1
  5.08 mm pitch (4 pin) for low impedance x 1
  - 3.81 mm pitch (4 pin) for mic input x 1
  - 3.81 mm pitch (3 pin) for external controller use x 1
• Cable band kit x 1
• Rubber feet x 4
• Start-up Guide (including warranty) x 1
• TASCAM ID registration guide x 1