NE24.24MT (4X8) LOGIC | PROTEA NE24.24M SERIES DSP MATRIX PROCESSOR, 4X8 I/O, CONFIGURED WITH 4X8 LOGIC CARD
NE24.24MT (4X8) LOGIC
PROTEA NE24.24M SERIES DSP MATRIX PROCESSOR, 4X8 I/O, CONFIGURED WITH 4X8 LOGIC CARD
NE24.24MT (4X8) LOGIC
PROTEA NE24.24M SERIES DSP MATRIX PROCESSOR, 4X8 I/O, CONFIGURED WITH 4X8 LOGIC CARD
- UM : EA
- Estimated Weight: 8.9
When yourinstall requires input/output matrixing with signal processing it doesn’t getmuch easier than programming your channels using Protea ne Software on your PC.The ne24.24M uses modular expansion cards to provide up to 24-channels of audiomatrixing and processing. The base unit offers a 4-input/4-outputconfiguration. Each input and output expansion card has an individual DSPprocessor allowing you to expand the total input or output 4 channels of DSPprocessing at a time. These cards are easily installed in the field without theneed to reprogram the device.
Matrixingallows you to route any input to any output and control individual levels oncethey have been assigned. Fixed path architecture and extensive processing powerper channel will reduce the amount of time it takes to set up your system.
Anoptional GPO Logic Card allows the ne24.24M to trigger projection screens,curtains or lights. The logic card is installed in place of a 4-input or4-output card and occupies one of the four expansion slots.
Features
10/100Ethernet & RS-232 computer interface standard
ExtensiveDSP available via Protea DSP
Easyand intuitive user interface
Controlwith free Ashly Remote iOS App Mic/line inputs
24-bitA/D–D/A audio resolution
Upto 24-channels of audio processing
4×4base unit configuration
Expandinputs or outputs 4-channels per module
Moduleseasily field installable
Euroblockconnectors for audio, preset recall, DC remote level control and data in/out
31preset locations
Remotecontrols for level, preset recall and programmable functions
Third-partycontrol-friendly
Inputand output metering viewable in dBu
Multi-levelsecurity
Safety/Compliance:cTUVus,FCC, CE, RoHS
| Specifications | Note: 0dBu = 0.775 VRMS |
| Input Active | Balanced, 18k Ohms |
| Input Gain Range | -50dB – +12dB, Selectable Polarity |
| Output | Active Servo Balanced, 112 Ohms |
| Input/Output Level | +20dBu (Max) |
| Output Gain Range | -50dB – +12dB, Selectable Polarity |
| Frequency Response | 20Hz–20kHz, ±0.25 dB |
| THD | <0.01% @ 1kHz, +20 dBu |
| Dynamic Range | >110dB (20Hz–20kHz) Unweighted |
| Output Noise | <-90 dBu Unweighted |
| Environmental | 40–120 deg. F, (4-49 deg, C) noncondensing |
| Rear Panel | |
| Controls | Remote level control, Data In/Out ports, Preset Recall, Logic Inputs, On/Off switch |
| Connections | 10/100 Ethernet port, RS-232, Euroblock In/Out |
| Power Cord | 3-Prong, Detachable |
| Weight, Dimensions & Power | |
| Dimensions | 19”L x 3.5”H x 8.5”D (483mm x 89mm x 216mm) |
| Unit Weight | 8.9lbs (4.04kg) |
| Shipping Weight | 12lbs (6kg) |
| Power Requirements | 90 – 240VAC, 50/60Hz, 40W |
