RPC-P15 | PASS-THROUGH REMOTE POWER CONTROL-15A, 5-15R DUPLEX OUTLET, CORD

RPC-P15
PASS-THROUGH REMOTE POWER CONTROL-15A, 5-15R DUPLEX OUTLET, CORD

Lowell RPC-P15 Remote Power Control with Pass-Thru RJ45 Jacks, 2–15A Outlets

Use model RPC-P15 with a compatible sequencer or relay to provide a low voltage way to control AC power to remote equipment. Each device has a DIP switch to set its position in the startup order. Dual RJ45 jacks allow for quick installation. Only the first module in a series needs to connect to a compatible sequencer for activation (order sequencer separately).

• Steel chassis with black finish:  8.00 in. x 3.25 in. x 1.95 in
• Power Rating:  125VAC, 15A
• Power Inlet: NEMA 5-15P (6 ft. cord)
• Power Outlets:  NEMA 5-15R duplex
• RJ45 jacks (2)
• DIP Switch: Because the sequence step is selected via the switch on each RPC-P unit, the startup sequence can be quickly modified without re-wiring.
• Activation:  This model requires sequencer (SEQ-P4) with an external trigger (SPST switch or DSP voltage connection) for activation.
• Multiple RPC-P units can be connected to each other (or compatible relays) to control all from a single location (up to 20 RPC-P units per step)