RS-180 | INDOOR/OUTDOOR SUB-STATION, VANDAL/WEATHER-RESISTANT, CALL BUTTON W/LED, CONTROL OUTPUT
RS-180
INDOOR/OUTDOOR SUB-STATION, VANDAL/WEATHER-RESISTANT, CALL BUTTON W/LED, CONTROL OUTPUT
RS-180
INDOOR/OUTDOOR SUB-STATION, VANDAL/WEATHER-RESISTANT, CALL BUTTON W/LED, CONTROL OUTPUT
- UM : EA
- Estimated Weight: 1.4
The RS-180 panic vandal resistant single button outdoor call panel substation is ADA compliant and is designed to be used with the N-8000RS or N-8010RS substation interfaces. It provides a 4cm (1.57in) speaker for clear audio and a single vandal resistant red anodized metal call button, with button bezel, allowing for simple call-in operation. The call button can be programmed to report to any master station based on job specification. Additionally the substation’s front faceplate is made from thick 11 gauge stainless steel stock for added durability and the circuit boards have been weather treated for moisture exposed installations. Visual call-in progress feedback is achieved with a red LED above the call switch. An open collector trigger is provided for local triggering by the call-in button for devices such as a strobe light or other indicator while a call is in progress. The substation requires 3-conductor shielded twisted pair (STP) wiring and mounts in a standard US dual gang flush or wall mount box.
|
Rated Input |
1 W |
|
Rated Impedance |
625 O (1 W/25 V) |
|
Internal Speaker |
4 cm cone-type |
|
Control Output |
Open collector, Withstand voltage: 30 VDC, Control current: 30 mA (The open collector output is kept turned on till the conversation is finished after the call button was pressed.) |
|
Wiring |
Two-core shielded cable |
|
Transmission Range |
0.5 km (546 yd)/f0.5 mm (AWG24), 0.8 km (874 yd)/f0.65 mm (AWG22), 1.3 km (1421 yd)/f0.9 mm (AWG19) |
|
Operating Temperature |
-10°C to +50°C (Temperature range not to freeze the speaker and switch) |
|
Finish |
Panel: Stainless steel, hairline; Call button: Metal; Printed circuit board: Weather-resistant coating |
|
Dimensions |
120 (W) × 120 (H) × 58.5 (D) mm |
|
Weight |
570 g |
|
Accessory |
Box mounting screw (No.6-32UNC × 8) ……4, Box mounting screw (M4 × 25) ……4 |
|
Applicable Box |
For flush-mount: 2-gang electrical box YC-302 (option), For surface-mount: Indoor wall-mount box YC-822 (option), Outdoor wall-mount box YC-823 (option) |
