RU-RN04 | NETWORK TO MIC/LINE INTERFACE 0X4
RU-RN04
NETWORK TO MIC/LINE INTERFACE 0X4
Click image to enlarge
RU-RN04
NETWORK TO MIC/LINE INTERFACE 0X4
- UM : EA
The RU-RN04 modules are Dante/AES67 audio network interface products compatible with microphones and line-level audio equipment inputs and outputs. These modules are designed to be mounted in equipment racks, closets, conference tables and on shelves or backboards in commercial/industrial installations.
- Default Configuration Converts 4 Dante/AES67 Channels to Mic or Line Outputs
- 4 X 4 Mixing Matrix Signal Paths and DSP Filters Expand System Design Flexibility
- Ultra-Low Latency: 1 ms Analog to Digital to Analog
- Analog Outputs Connect through XLR or Detachable Terminal Block
- Terminal Block Connections may be Wired Balanced or Unbalanced
- One DSP Filter for Each Dante/AES67 Input
- Three DSP Filters for Each Analog Output
- Selectable DSP Filters: None, Hi-Pass, Lo-Pass, Shelf Hi/Lo, Notch Boost/Cut
- All DSP Filters are Fully Programmable
- Each Output Stage Receives Audio through a Four-Channel Mixer
- Each Output Mixer Source is Adjustable From Unity (Fully On) to OFF
- Analog Outputs are Protected from External Phantom Voltages up to P48
- Each Analog Output Equipped with a Selectable 180° Polarity “Phase” Inverter
- Each Analog Output Equipped with a Selectable Line to Mic Attenuator Pad
- Analog Outputs Adjust in 1 dB Steps Below +4 dBu Line or -46 dBu Mic Level
- Each Output Attenuator is Adjustable in 1 dB Steps 0 to -63 dB then OFF
- Remote Controllable Using Compatible RDL Remote Controls
- Multicolor LED Indication of Audio Levels, Sync and Signal Presence
- Operates at 48 kHz or 96 kHz with High Resolution 24 Bit D/A Conversion
- All Operating Parameters and Settings Programmed using RDL CONSOLE
×
This website uses cookies to ensure you get the best user experience. By continuing to use this site, you agree to our
cookies and terms of use policy.