RU-RN40 | MIC/LINE TO DANTE NETWORK INTERFACE 4X0
RU-RN40
MIC/LINE TO DANTE NETWORK INTERFACE 4X0
Click image to enlarge
RU-RN40
MIC/LINE TO DANTE NETWORK INTERFACE 4X0
- UM : EA
The RU-RN40 modules are Dante/AES67 audio network interface products compatible with microphones and line-level audio equipment inputs and outputs. These modules are designed to be mounted in equipment racks, closets, conference tables and on shelves or backboards in commercial/industrial installations.
- Default Configuration Converts Four Mic or Line Inputs to Dante/AES67 Outputs
- 4 X 4 Mixing Matrix Signal Paths and DSP Filters Expand System Design Flexibility
- Ultra-Low Latency: 1 ms Analog to Digital to Analog
- XLR and Detachable Terminal Block Provided for Each Input
- Terminal Block Connections may be Wired Balanced or Unbalanced
- Input Gains Adjustable From 0 dB to 60 dB in 3.3 dB steps
- P48 Phantom Individually Selectable per Input or Automatically Gain-Dependent
- Selectable Audio Compressor/Limiter on Each Analog Input
- One DSP Filter for Each Audio Input, Three DSP Filters for Each Dante Output
- Selectable DSP Filters: None, Hi-Pass, Lo-Pass, Shelf Hi/Lo, Notch Boost/Cut
- All DSP Filters are Fully Programmable
- Each Output Stage Receives Audio through a Four-Channel Mixer
- Each Output Mixer Source is Adjustable From Unity (Fully On) to OFF
- Provides Functions of Audio Mixer and/or Distribution Amplifier
- Dante/AES67 Outputs are Adjustable in 1 dB Steps 0 to -63 dB then OFF
- Remote Controllable Using Compatible RDL Remote Controls
- Multicolor LED Indication of Audio Levels, Sync and Signal Presence
- Extremely Low Noise <-69 dB Below Operating Level at 60 dB (Max) Input Gain
- Operates at 48 kHz or 96 kHz with High Resolution 24 Bit A/D Conversion
- All Operating Parameters and Settings Programmed using RDL CONSOLE
×
This website uses cookies to ensure you get the best user experience. By continuing to use this site, you agree to our
cookies and terms of use policy.