RX21-25SFD | 25" DEEP, 21RU MOBILE EQUIPMENT RACK INCLUDES: CASTERS, SIDE HANDLES, AND SOLID DOORS
RX21-25SFD
25" DEEP, 21RU MOBILE EQUIPMENT RACK INCLUDES: CASTERS, SIDE HANDLES, AND SOLID DOORS
RX21-25SFD
25" DEEP, 21RU MOBILE EQUIPMENT RACK INCLUDES: CASTERS, SIDE HANDLES, AND SOLID DOORS
- UM : EA
- Estimated Weight: 157.0
The RX21-25SFD mobile cabinet is ruggedly constructed of 16-gauge CRS and include heavy-duty casters. Equipped with a front pair of 11-gauge CRS adjustable mounting rails tapped 10–32 on standard E.I.A. 5/8"- 5/8"-1/2" spacing. Easy wiring access is provided through three wire isolation holes (two, 1 1/2" dia., and one oblong 1 1/2" x 3") in the rear base flange. The units’ four, oversized, heavy-duty casters, two of which are locking, ensure smooth mobility, and have a load capacity of 175 lb. each – 700 lb. total weight capacity. Also include vented and removable locking doors, as well as vented top-front and top-rear flanges. Surface mounting front door is 1" deep to provide clearance for equipment knobs and handles which protrude up to 1 1/2" from the front of the rail. Cabinet is finished in #962 black epoxy
Optional RR21 rear mounting rails are available for additional support. Front-to-rear mounting rail supports have slotted cutouts to easily adjust rail depth and to provide open raceways for containing vertically run wire and cable.
FEATURES
- - 16-Gauge CRS Frame Manufactured to E.I.A. Standards
- - Four, 4" Heavy-Duty Casters (175 lb. cap./ea.)
- - Includes 1 Pair Adjustable, 11-Gauge, Front-to-Rear Mounting Rails
- - Mounting Rail Supports with Slotted Cut-Outs for Vertical Wire Management
- - Perforated Front and Rear Top Flanges, Sides and Rear Door Provide Ventilation and Dissipation of Equipment-Generated Heat
- - Removable Front and Rear Doors (Right or Left-Hand Hinging) are Identically Keyed for Security and Convenience
- - RR21 Optional Rear Mounting Rails Available
- - Rubber-Padded Steel Grip "Road Handles" (2 Per Side)
- - Standard Rack Includes Base, Top Panel, Side Panels, Casters, Front and Rear Doors
- - Three Wire Isolation Holes Located on Bottom of Rear Panel for External Wire Access
- - Welded Frame for Long-Lasting Durability
SPECIFICATIONS
RACK UNITS | 21 |
HEIGHT | 45 3/4" (116.21 cm) |
WIDTH | 22 5/16" (56.68 cm) |
DEPTH | 25 1/2" (64.77 cm) |
USABLE DEPTH | 24" (60.96 cm) |