SEQR-P4 | PASS-THROUGH POWER SEQUENCER-4STEP, RACKMOUNT 1U CHASSIS W/POWER SUPPLY AND 4 PLUG ADAPTORS

SEQR-P4
PASS-THROUGH POWER SEQUENCER-4STEP, RACKMOUNT 1U CHASSIS W/POWER SUPPLY AND 4 PLUG ADAPTORS

Lowell SEQR-P4 is a low voltage power sequencer that has pass-through RJ45 jacks for quick connections. It works with compatible remote power controls and relays (pass-thru line) for time-delayed activation/deactivation of equipment. The sequencer is activated by a switch. An external trigger can also be used such as an alarm system, remote switch, DSP connection, or system switch.

• Quick “pass-through” connections with two RJ45 jacks
• Because the step assignment is actually selected on the connected devices (RPC-P Series remote power controls or RY-P Series relays), the startup sequence can be quickly changed without the need to re-wire.
• Four delayed closure circuits activate in sequential order (1, 2, 3, 4) and deactivate in reverse order (4, 3, 2,1). Delay between steps is easily adjusted with DIP switch.
• Sequencing is initiated via rocker switch on front panel. Remote switches can also be added (see spec sheet).
• Alarm interface for use where required by local building code
• 19 in. x 9 in. x 1U chassis
• LED status indicators