SF-1 (SHARC FIN) | SHADED AMPLITUDE FULL RANGE LOUDSPEAKER, COVERAGE PATTERN: 160° HORIZONTAL X 60° VERTICAL
SF-1 (SHARC FIN)
SHADED AMPLITUDE FULL RANGE LOUDSPEAKER, COVERAGE PATTERN: 160° HORIZONTAL X 60° VERTICAL
SF-1 (SHARC FIN)
SHADED AMPLITUDE FULL RANGE LOUDSPEAKER, COVERAGE PATTERN: 160° HORIZONTAL X 60° VERTICAL
- UM : EA
- Estimated Weight: 75.0
The SF1 is a two-way loudspeaker design housing two 8-inch low frequency drivers and a single 1-inch-high frequency compression driver. What helps set this speaker apart is its asymmetrical vertical dispersion, which allows for extremely even coverage.
Driver placement within the horn, in unison with a synergy crossover network, allows for proper phase alignment between frequency bands. This permits the physically separated bands to combine and emerge from the horn in synchrony, greatly reducing off axis distortions in frequency response while also allowing for high amounts of clarity at great distances. Furthermore, out of band harmonic distortion is limited due to the use of acoustic low pass filters. It provides even coverage front to back and nearly 180 degrees wide
Features
Synergy Horn Technology
Asymmetric Vertical Dispersion
160° x 60° coverage
|
Coverage Pattern |
160° horizontal, 60° vertical |
|
Operating Frequency Range |
37Hz-14.7KHz +/- 3dB, |
|
Continuous Output |
113 dB SPL |
|
Peak Output |
119 dB SPL |
|
Sensitivity |
89 dB SPL (2.83V into rated Z, at 1 meter), measured in whole space |
|
Driver Complement |
Low/Mid 2 x 8", |
|
Dimensions |
25 x 12 x 38 inches |
|
Weight |
75 lbs |
|
Rated Impedance |
4 Ohm |
|
Power Rating |
500W continuous, |
