SF-1-W (SHARC FIN) | SHADED AMPLITUDE FULL RANGE LOUDSPEAKER, COVERAGE PATTERN: 160° HORIZONTAL X 60° VERTICAL, WHITE
SF-1-W (SHARC FIN)
SHADED AMPLITUDE FULL RANGE LOUDSPEAKER, COVERAGE PATTERN: 160° HORIZONTAL X 60° VERTICAL, WHITE
SF-1-W (SHARC FIN)
SHADED AMPLITUDE FULL RANGE LOUDSPEAKER, COVERAGE PATTERN: 160° HORIZONTAL X 60° VERTICAL, WHITE
- UM : EA
- Estimated Weight: 75.0
The SF1 is a two-way loudspeaker designhousing two 8-inch low frequency drivers and a single 1-inch-high frequencycompression driver. What helps set this speaker apart is its asymmetricalvertical dispersion, which allows for extremely even coverage.
Driver placement within the horn, in unisonwith a synergy crossover network, allows for proper phase alignment betweenfrequency bands. This permits the physically separated bands to combine andemerge from the horn in synchrony, greatly reducing off axis distortions infrequency response while also allowing for high amounts of clarity at greatdistances. Furthermore, out of band harmonic distortion is limited due to theuse of acoustic low pass filters. It provides even coverage front to backand nearly 180 degrees wide
Features
Synergy HornTechnology
AsymmetricVertical Dispersion
160° x 60°coverage
| Coverage Pattern | 160° horizontal, 60° vertical |
| Operating Frequency Range | 37Hz-14.7KHz +/- 3dB, |
| Continuous Output | 113 dB SPL |
| Peak Output | 119 dB SPL |
| Sensitivity | 89 dB SPL (2.83V into rated Z, at 1 meter), measured in whole space |
| Driver Complement | Low/Mid 2 x 8", |
| Dimensions | 25 x 12 x 38 inches |
| Weight | 75 lbs |
| Rated Impedance | 4 Ohm |
| Power Rating | 500W continuous, |
