Product Details

  • MAP: $591.00 / EA
  • List Price: $739.00 / EA
  • Log in to see if custom discounts apply
  • Case Quantity: 0

UNDX2IO+-C
4X2 CHANNEL 2 GANG US WALL PLATE 2 MIC/LINE IN X 2 OUT (XLR), PHOENIX I/O, POE- DANTE CONTROL

  • Unit Price: $591.00
  • UM : EA

Product Overview

The unDX2IO+ Dante Audio Interface is a cost effective multi-IO wall box. The unDX2IO+ features two balanced mic/line XLR inputs, two balanced XLR line outputs, and a further two balanced line inputs on de-pluggable connectors on the side of the unit. All inputs and outputs can be used simultaneously and all audio channels are available separately. The unDX2IO+ is designed to fit into all dual gang US junction boxes, mud rings, and old work brackets. The unDX2IO+ is PoE enabled, so all connectivity (power, control, and data) is provided by a single CAT-5/6 cable. The unDX2IO+’s size and I/O density make it easy to put Dante connectivity wherever it’s needed.

 

Key Features

  • Small form factor, can be unobtrusively located near analog sources or sinks
  • Four input gains to accommodate common line levels, dynamics, and phantom powered mics
  • +48V phantom power per channel - powers all types of phantom powered microphones typically used in installed AV systems
  • Analog output gain is software adjustable between 0dB and -60dB plus mute to accommodate all types of line input levels (at 0dB input gain) and +20dBu maximum output levels
  • Full Dante system status LEDs on the front panel
  • Ships with both black and white Decora plates and fascia inserts.
  • Product Accessory kit available

 

Firmware Comparability Note:

There are three control interface types available for Attero Tech Dante devices. Each interface type requires different firmware to be loaded into the device. The first type is a Dante proprietary interface (-C) which is typically used by already have built-in support for Attero Tech devices. The second firmware option enables a 3rd party UDP (-U) interface and is available to anyone to use with a device capable of forming and sending a UDP message as well as receiving and parsing the response. The third firmware option is the Biamp Tesira proprietary control (-B). These products integrate with the TesiraFORTÉ DSPs.

Products can be ordered with any command interface to support an installation's system control requirements. To specify a specific interface, note the required product suffix as follows:

Device Name

Part Number

unDX2IO+ (Dante Proprietary Control)

unDX2IO+-C

unDX2IO+ (UDP 3rd Party Control)

unDX2IO+-U

unDX2IO+ (Biamp Tesira Control)

unDX2IO+-B

 

More Info

This website uses cookies to ensure you get the best user experience. By continuing to use this site, you agree to our cookies and terms of use policy.