UNICA 8M 4K8 | 8CH 4000W TOTAL POWER AMP (8X 500W) 70V/100V OR 4O/8O, DSP, DANTE, AES67 & POWERSHARING / 1RU

Powersoft 3rd Generation Amplification Technology

State-of-the-art processing and amplification architecture ensures maximum audio performance and reliability, enabling advanced processing, networking, and monitoring capabilities.

Networking

Three configurable 1Gb ports enable daisy-chain and Dante-redundant network topologies. Includes two operating modes: Switched and Split-Redundant. Split-Redundant mode allows network traffic separation.

PoE Input

Ensures that network ports and amplifier logic remain powered in case of mains power loss, minimizing wake-up time when power is restored. It also allows monitoring of speakers and amplifier outputs when powered by PoE++.

Power Sharing

Each output can deliver up to twice the rated power when asymmetrically loaded. Can drive both 70/100V loudspeakers and low-impedance speakers down to 2O without mode configuration. Output channels can be bridged with extensive diagnostic tools.

Front Panel Display

Provides amplifier status and general information, useful for troubleshooting, monitoring, and maintenance.

ArmoníaPlus Software

Includes network connectivity and onboard processing. Adjust amplifier parameters, load speaker presets, and fine-tune complex systems easily with Powersoft's software.

Eco Mode

Automatic energy-saving function allows each output channel to be turned off independently when no audio is passing, reducing power consumption. Channels turn on instantly once a signal is detected.

Easy Swap

Allows for quick amplifier replacement without specific product knowledge. Backup data is stored on a USB flash drive for easy restoration on a replacement amplifier.

Universo Cloud

Cloud-native connectivity enables remote monitoring of amplifier status from any device, anywhere, via Powersoft's Universo cloud platform.