WF T5CD-00 | WAVECAST C WI-FI AUDIO SYSTEM WITH DANTE

  • Call for Price
  • Log in to see if custom discounts apply
  • Case Quantity: 0
  • Usually ships in 3-7 days
WAVECAST C WI-FI AUDIO SYSTEM WITH DANTE
WAVECAST C WI-FI AUDIO SYSTEM WITH DANTE
Click image to enlarge
WAVECAST C WI-FI AUDIO SYSTEM WITH DANTE
WAVECAST C WI-FI AUDIO SYSTEM WITH DANTE

WF T5CD-00
WAVECAST C WI-FI AUDIO SYSTEM WITH DANTE

  • UM : EA
  • Estimated Weight: 5.1

WaveCAST C is a Wi-Fi audio platform. The audio is streamed to an app on personal devices or a Wi-Fi receiver, which can be used for assistive listening and other purposes. WaveCAST C integrates with third-party room systems allowing AV professionals to control with Telnet commands via Ethernet.

It is built on a hardware-based DSP audio system architecture, allowing system optimization to achieve the highest quality experience for the particular audio stream being delivered.

Professional audio inputs on the WaveCAST C include 1/4” XLR connectors, phantom power, and a line level output jack. In addition to multi-stage gain control inputs, the DSP features include AGC, limiters, high and low pass filter, and adjustable range compressor control. The 16-bit DAC provides a 48Khz sample rate for a smooth digital stream and minimizes digital harshness. WaveCAST C supports both unicast and multicast network configurations. Up to four WaveCAST C systems can be connected to the same Wi-Fi network to provide multiple listening channels — supporting 45 users in unicast mode or 1500+ users in multicast mode.

The WaveCAST C can have most settings changed via the front panel interface or the hosted web interface. A remote programming guide is available upon request.

The new WaveCAST app provides an easy-to-use, intuitive user interface and is available on iOS or Android. Listeners easily select channel and volume level once their personal device is connected to the Wi-Fi network.

Dimensions

8.45" W x 8.25" D x 1.72" H (21.5 cm x 21 cm x 4.4 cm)

Weight

Transmitter: 3.2 lbs (1.45 kg)

Color

Black

Rack Mount

Standard 19” Rack, one EIA rack space high, 1/2 space wide, 1–2 units can be mounted in a single rack space with optional RPK 005 (single) or RPK 006 (double) Rack Mount Kits

Power Supply

Desktop Style Transformer (TFP 062); Input: 100-240 VAC, 50/60 Hz. IEC Line Cord; Output: 24 VDC, 750 mA, 18W. 2.5mm ID center positive barrel connector

Power ON Indicator

Push On/Push Off latching power button with backlight. Green backlight indicates power ON, backlight off indicates power OFF.

Temperature Range

Operating: +32° F to +122° F (0° C to 50° C); Storage: -4° F to +158° F (-20° C to 70° C)

User Interface

1. 3.12” High Resolution OLED display with selections via buttons. 2. Hosted Web page. 3. Telnet commands over ethernet (see our WaveCAST and FM+ Programmers Guide” for available commands and protocol).

Dante

(1x) RJ-45 jack. Only available on WF T5CD

Ethernet

RJ-45 on back of unit supports CAT 5e cable lengths up to 328 feet (100 meters); 10/100 Base-T IEEE 802.3 compliant, unique MAC address. RJ-45 jack used for web page and streaming audio out. An external Router/DHCP Server is required to stream audio to receiving devices.

Audio Section

Audio Inputs

(1x) Combination 3-pin XLR, 1/4” (TRS) jack for balanced or unbalanced line level, or balanced or unbalanced microphone with selectable phantom power. Optional RJ-45 Dante Input (“D” models only).

Audio Processor Functions

DSP based; Compression: 1:1, 1.5:1 or 2:1; High-pass and Low-pass Filter Frequency control, Music, Voice, and Hearing Assistance Audio Presets

Frequency Response

31-16000 Hz, ±3 dB (re: 1 kHz) (“Music” Audio Preset)

Signal-to-Noise Ratio

64 dB (typical) Transmitted RF @ 1kHz

Total Harmonic Distortion

Less than 0.25% @ 1 kHz (RF output)

Common Mode Rejection

Greater than 57 dB @ 1 kHz, Mic or Line mode

Audio Input Gain Adjust

Adjustable from +24dB to -60 dB, in 1dB steps from front screen or web page

Phantom Power

14.4 VDC applied through 2.2 kOhms resistors to analog combo jack: Pin 2 and Pin 3 on XLR jack, or tip and ring on 1/4" TRS jack

Audio Level Display

Front screen bar graph display, each segment representing 3dB. It ranges from -18 (1 segment lit) to +12dB (10 segments lit). Over-range warning is indicated by ‘OLVD’ and flashing empty bar.

Headphone Output

1/4" TRS stereo jack, mono signal, 7.8 mW total power with 33 O.

Dante Output

(1x) RJ-45 jack, only available on WF T5CD

Approvals

FCC, RoHS3, WEEE, Industry Canada, CE, UK CA, RCM

Warranty

2-year parts and labor

 

Item Added to Cart View Cart
Wishlist Updated View Wishlists
This website uses cookies to ensure you get the best user experience. By continuing to use this site, you agree to our cookies and terms of use policy.