WM-1000(BOS) | 1 CH HEADSET STATION WITH LISTEN/CALL/TALK KEY, BALANCED/UNBALANCED OPERATION,

WM-1000(BOS)
1 CH HEADSET STATION WITH LISTEN/CALL/TALK KEY, BALANCED/UNBALANCED OPERATION,

The WM-1000 and WM-2000 Intercom Stations are designed for stationary, wall mounted installation in standard two-gang electrical boxes. The WM-1000 is a single-channel station; the WM-2000 provides switch selectable access to either of two (2) intercom channels. The WM-1000 and WM-2000 are ideal when users need to access the intercom system from strategic locations where a desktop station would be unsuitable, but they do not wish to carry around a belt-pack station. Since all of the intercom electronics are in the intercom station, the user need only connect a headset or telephone style handset to begin communicating.

.FEATURES

• - Channel Select Switch (WM-2000 Only) – Used to switch between intercom channels one (1) and two (2). The switch lights green for channel one and red for channel two (2). 
• - Intercom Listen Key – Both momentary (push-to-listen) and latching (hands-free listen) are possible. Call Key – used to send call signals on the intercom channel and to indicate incoming calls. 
• - Intercom Talk Key – Both momentary (push-to-talk) and latching (hands-free talk) are possible. Additionally, the WM-1000/WM-2000 have a feature called “mic kill receive” which lets an operator at a remote master station (such as the US-2002) turn off the talk key. 
• - Dynamic-Mic Headset Connector – 4-pin male XLR connector accepts headsets with monaural headphones and either a balanced or unbalanced dynamic microphone. 
• - Volume Control – Adjusts intercom volume to headset. RTS Audiocom/Clear-Com Selector Switch – The selector switch sets the intercom station for compatibility with either RTS Audiocom or Clear-Com channel connector pin-outs, channel power requirements, and call signaling requirements. 
• - Configuration DIP switches – DIP switches are provided to enable/disable the following features: Call Beep: An optional call beep tone can be used for incoming call notification. Headset Microphone Type Selection: Balanced or unbalanced microphone may be selected. DC Call Enable: This may be turned on to use the intercom station with intercom systems that use DC call signaling. 
• - Connections Terminal Block – Used to connect intercom channel(s) and an optional local power supply. Sidetone Trimmers – These are used to adjust the level of the station operator’s own voice in the headphone
• - Mounting Holes – The mounting holes fit any standard, two-gang electrical box. 
• - Clear-Com Compatible

More Info