ATW-2192XCITH | 2000 SERIES WIRELESS SYSTEM INCLUDES: ATW-R2100B RECEIVER AND ATW-T210A BODY-PACK TRANSMITTER

Overall System

Operating Frequencies

UHF, Band D: 656.125 to 678.500 MHz DISCONTINUED IN NORTH AMERICA, Band I : 487.125 to 506.500 MHz

Modulation Mode

FM

Maximum Deviation

±40 kHz

Frequency Response

100 Hz to 15 kHz (+1 dB, -3 dB)

Operating Range

100 m (300'), typical, Open range environment with no interfering signals.

Total Harmonic Distortion

< 1% (at 1 kHz, ±20 kHz deviation)

Operating Temperature Range

5º C to 45º C, 41º F to 113º F, Battery and LCD performance may be reduced at very low temperatures.

Number Of Channels

10 total

Notes

Third-generation 2000 Series (“b” version) components: ATW-R2100b receiver, ATW-T210b body-pack transmitter, ATW-T220b cardioid dynamic microphone/transmitter, Second-generation 2000 Series (“a” version) components: ATW-R2100a receiver, ATW-T210a body-pack transmitter, ATW-T220a cardioid dynamic microphone/transmitter, First-generation 2000 Series (original) components: ATW-R2100 receiver, ATW-T210 body-pack transmitter, ATW-T220 cardioid dynamic microphone/transmitter

CONSUMER ALERT

Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC’s wireless microphone website at www.fcc.gov/cgb/wirelessmicrophones.

Handheld Transmitter

RF Power Output

High: 30 mW; Low: 10 mW (switchable), at 50 ohms

Spurious Emissions

Following federal and national regulations

Microphone Element

Dynamic cardioid

Battery Type

Two 1.5V AA alkaline (not included) or two 1.2V AA NiMH (not included), Recharging power for NiMH batteries (with ATW-CHG2): U.S./Canada/Latin America: 3.2 V DC, 230 mA x2, Other world areas: 3.2 V DC, 320 mA x2

Battery Life

High: 7 hours (alkaline), Low: 9 hours (alkaline), Depending on battery type and use pattern.

Dimensions

232.0 mm (9.13") long, 48.0 mm (1.89") diameter

Net Weight

252 g (8.9 oz), without batteries

Accessories Included

AT8456a Quiet-Flex stand clamp

Body Pack

RF Power Output

High: 30 mW, Low: 10 mW (switchable), at 50 ohms

Battery Life

High: 7 hours (alkaline), Low: 9 hours (alkaline), Depending on battery type and use pattern.

Battery Type

Two 1.5V AA alkaline (not included) or two 1.2V AA NiMH (not included), Recharging power for NiMH batteries (with ATW-CHG2): U.S./Canada/Latin America: 3.2 V DC, 230 mA x2, Other world areas: 3.2 V DC, 320 mA x2

Dimensions

66.0 mm (2.60") W x 22.5 mm (0.89") D x 92.3 mm (3.63") H

Input Connections

Four-pin Locking Connector, Pin 1: GND, Pin 2: INST INPUT, Pin 3: MIC INPUT, Pin 4: DC BIAS +9V

Net Weight

81 g (2.9 oz), without batteries

Spurious Emissions

Following federal and national regulations

Receiver

Receiving System

True diversity

Image Rejection

60 dB nominal, 55 dB minimum

RF Sensitivity

20 dBuV at 60 dB S/N ratio (50 ohms termination)

Antenna Input

BNC-type, 50 ohms, Bias voltage 12V DC, 60 mA, each

Power Requirements

12-18V DC, 500 mA

Dimensions

210.0 mm (8.27") W x 162.2 mm (6.39") D x 44.0 mm (1.73") H Not including BNC connectors or feet.

Weight

1.0 kg (35.3 oz), without accessories

Accessories Included

Two flexible UHF antennas; AC adapter (country dependent); rack-mount adapters

ADDITIONAL RECEIVER SPECS

Maximum Output Level

XLR, balanced: +9 dBV, ¼" (6.3 mm), unbalanced: +4 dBV

Balanced Audio Output Attenuator

Two position switch: 0 / -12 dB