AA400PHD | 6-INPUT, MIXER AMPLIFIER, 400W INTO 25V/70V AND 4O LOADS, WITH AUTOMATIC SYSTEM TEST CIRCUITRY (PHD)
AA400PHD
6-INPUT, MIXER AMPLIFIER, 400W INTO 25V/70V AND 4O LOADS, WITH AUTOMATIC SYSTEM TEST CIRCUITRY (PHD)
AA400PHD
6-INPUT, MIXER AMPLIFIER, 400W INTO 25V/70V AND 4O LOADS, WITH AUTOMATIC SYSTEM TEST CIRCUITRY (PHD)
- UM : EA
- Estimated Weight: 35.0
The AA400PHD includes a patent pending automatic system test, the Push Here Diagnostic (PHD). The PHD button is designed to check the connected speaker lines for wiring and impedance errors. This test can be activated once all speakers are connected and the circuit automatically verifies that the attached speakers'' tap settings do not exceed the amplifier''s rated power, no speakers are mistakenly tapped at 8O, and the speaker wire is free from shorts.
The unit also incorporates a Remote Input Selection and Remote Level Control feature that allows the integrator to use a remote wall plate (AtlasIED model WPD-RISRL) and allow the user to select the input and adjust the volume from that wall plate up to 200 feet from the amplifier.
The AA400PHD provides 400-watts output power into 25V, 70.7V, or 4O speaker systems. Rear panel DIP switch allows for creation of Zone 2 output mix using any or all of inputs 1-4. Unit can also be set-up to mute Inputs 2 through 6 on signal from Input 1 for paging applications where other input sources need to be muted during a page. Inputs 1-4 are either Mic or Line input selectable and Phantom Power is an option when using them as a microphone input.
Features:
- 400W into 25V/70.7V and 4O Loads
- Automated Diagnostic System Test (Push Here Diagnostic)
- Four Balanced Mic/Line/Tel Inputs w/ Phantom Power
- Input Assignable Zone 2 Output
- Remote Level Control
- Remote Input Select (RIS)
- Line Output
- Preamp In for External Processors
- Variable Mute Sensitivity Control for Input 1
- Contact Closure Mute Terminals
- Optional Rack Mount Kit Available - Model AARMK2-0
| Frequency Response | 50Hz - 15kHz |
|---|---|
| Connector Type | 4 Position Phoenix 3.5mm Pitch |
| Power Output | Max. Average Power @ 50Hz-15kHz with .5% THD, 4O 400W RMS |
| Height | 3.66" (93mm) |
| Width | 16.54" (420mm) |
| Depth | 14.6" (422mm) |
| Weight | 34lb |
| Shipping Weight | 37.2lb |
| Voltage Compatibility | 110V - 120V |
| Warranty Period | 36 months from date of purchase |
Customers Also Bought
AA-YSUM
PASSIVE SUMMING CABLE FOR AA SERIES AMPLIFIERS 5.5MM PHOENIX CONNECTOR
MAP: $54.99 / EA
AARMK2-0
2RU RACK MOUNT KIT FOR AA120 , AA240, AA200PHD, OR AA400PHD - BLACK FINISH TO MATCH AMP
MAP: $46.99 / EA
FAP42T
4" COAXIAL CEILING SPEAKER SYSTEM- 70V/100V 16W TRANSFORMER & 8OHM BYPASS, WHITE(PRICED EA, BUY 2'S)
MAP: $123.99 / EA
SD72W
8" DUAL CONE CEILING SPEAKER 25V/70V 5W TRANSFORMER AND MODEL 62-8 BAFFLE / WHITE GRILLE
MAP: $39.99 / EA
SD72WV
8" DUAL CONE CEILING SPEAKER 25V/70V ,5W TRANSFORMER, MODEL 62-8 BAFFLE, AND VOLUME CONTROL KNOB
MAP: $48.99 / EA
WPD-RISRL
WALL PLATE INPUT SELECT SWITCH WITH VOLUME CONTROL 10K POT AND INPUT INDICATOR
MAP: $54.99 / EA
Customers Also Viewed
AA240G
6-INPUT 240W MIXER AMPLIFIER W/GLOBAL POWER SUPPLY 25V, 70V, 100V, 8OHM / INCLUDES RACK KIT
MAP: $1,114.99 / EA
CP400
2CH 400W HIGH-PERFORMANCE COMMERCIAL AUDIO AMPLIFIER- 200 X 2 @ 70V/ 160 X 2 @ 8OHM/ 240 X 2 @ 4OHM
MAP: $924.99 / EA
CP700
2CH 700W POWER AMPLIFIER / 350W X2 @ 70V, 400W X2 @ 4OHM, 240W X2 @ 8OHM / 3 RU
MAP: $1,116.99 / EA
HPA602
2CH HIGH POWER AMP / 600W TOTAL (2X300W @ 4 OHM, 8 OHM, 70V, & 100V) / 2RU
MAP: $1,118.99 / EA
